Did 2 profiles. One with marshallers and one with VDGS on the terminal gates and marshaller on the ramps.
Did not find any info on handler and catering so chose the most obvious ones.
Custom pushbacks on all gates with push/pull where it made sense.
Python file that better organizes the gates (see picture) and sets more correct stopping position.
Jetway heights adjusted

A - B gates:
All gates edited except A1B, B2A and A6X because of small space.
All gates have jetway except A2A.
Gates A6-7 have glass walkways with visible pax. 
A2A: Walkin for all planes up to A320 size although it is tight with 320 :). The passenger tunnel is small so some passengers stick out on the side.

C gates:
Cargo ramps edited with 737 cargo and wingspan up to 45 m so should work with A300 cargo.

R Gates:
Overnight parking gates R 1-2-3-4-5 edited with 320.
Did not edit R 6-7-8-9.

Boeing assembly area:
Boeing manufactures 787 here so i guess they have offices there with their own terminal.
Edited the gates with 737 BBJ if you want to do som buisness flights and the 787 if you want to do some delivery flights. See picture for location.
Gate 1-2 are jetways gates at terminal. 
Parking 3 is next to a hangar. This will accomodate a 787 but you will clip static aircrafts wing to the left.

FBO AND Military aprons not edited.

AS ALWAYS REMEBER TO REPOSITION AT CURRENT GATE WHEN SPAWNING

INSTRUCTIONS

Place ONE of the .INI files in : \Users\\AppData\Roaming\virtuali\GSX\MSFS
Remember to delete or disable other ini files starting with kchs.

If you wish copy the kchs.py into the same folder. 

If you have any suggestions to make or errors to report give a comment or send me a pm.