Flightsim.toFlightsim.to
    W13 - Eagle's Nest Airport - Image 1

    Description

    Welcome!

    Waynesboro Eagle's Nest Airport (W13) is a privately owned public-use airport located in Waynesboro, Virginia. It features a 2,004 x 50 ft asphalt runway. W13 is home to a flight school, a glider club, and provides services including aircraft rental, maintenance, FBO services, and 100LL fuel. RNAV approaches are charted to both runways, and the runway is equipped with medium intensity edge lights. 

    Our Enhancement
    • Pavement coverage for the airport and residential streets
    • Custom objeccts: FBO building, and MX hangar
    • Default objects throughout the fly-in community, including 2 hangar-spawn points 
    • Rotating beacon above the hangar
    Installation

    Extract the "c3d-airport-w13-waynesboro.zip" to your Community folder

    Like our airports? Check out our portfolios  Freeware || Payware
    Did you know?

    This is our second "Waynesboro" airport, the first one was in Georgia!

    Note

    The default windsock is too big to place on top of the hangar and therefore is omitted from this enhancement, for now

    Comments(19)

    Log in to join the discussion

    Log In

    10 months ago

    Great urban scenery. I made a video, to highlight your attention to detail as well as your superb craftsmanship, Thanks. I just flew the wrong plane, as it was a one time, freeware plane, used only once is this video. Keep p the great scenery. https://youtu.be/vCRFybPsAEA?si=HDDTH-g5ub43lcoH
    cat3dualAuthor

    10 months ago

    Hi @smoothflyer, great video thanks for sharing it! Of course the AI ground traffic had to steal the thunder...

    11 months ago

    While taxiing to RWY 6 just past the long building something crashes the airplane. There is nothing visible that should cause this. It seems to grab the right wing and causes the plane to turn right very quickly.
    cat3dualAuthor

    11 months ago

    Hi @Bayoutalker, thanks for reporting this issue, we will investigate and release an update if necessary.
    cat3dualAuthor

    11 months ago

    Hi @Bayoutalker, we taxied a C172 down the taxiway towards runway 6 and did not encounter any collision in front of the long hangars. Can you verify the aircraft type you were using when you experienced the collision? The long hangars are "collision enabled", if the wingspan of the aircraft is too wide, it will collide with the object rather than going through.

    11 months ago

    I tried it with a high wing aircraft and it did not happen. With a low wing like the Beech G 36 it does occur but I had to hold to the right side of the taxiway. With a slightly longer wingspan I can stay in the center. This is not hitting the hanger as it is past the hanger when it happens.

    11 months ago

    Here is a video so you can see what is happening. I didn't cause the turn at the end, The crash did.
    https://youtu.be/KwUMxRyjaA4
    cat3dualAuthor

    11 months ago

    Hi @Bayoutalker, thanks for the clarification. The video is very helpful. We will investigate further into the mysterious invisible box by the taxiway.
    cat3dualAuthor

    11 months ago

    Hi @Bayoutalker, we tested the airport on 3 separate systems (both FS20 and FS24) and it seems we are unable to reproduce the issue. A low wing aircraft is able to pass through the area in question without colliding with anything. So the mystery deepens...

    To further investigate the matter, please kindly activate the collision debug in the sim. This feature highlights any collision boxes in red. To access this feature, activate the developer option in your sim, and select "debug" from the top menu, then "Collisions" and finally "Simple shape collisions". Hopefully this will at least identify the culprit of this invisible object. Meanwhile, we appreciate your patience in the process.

    10 months ago

    In Developer Mode the Debug did not show anything in that area and the plane did not hit any obstacle. In normal mode the crash does still occur.

    I also emptied my Community Folder and only installed this airport and the plane still hit the obstacle. So no conflict with any other add-on.

    Anything else you would like me to try?

    10 months ago

    I also tried with an empty Community Folder. With the stock airport there was no crash in either normal or developer mode.

    I hope this helps.

    10 months ago

    No change with the latest update.
    cat3dualAuthor

    10 months ago

    Hi @Bayoutalker, thanks for testing with an empty Community folder. Perhaps MSFS settings can be the culprit? We checked our scenery, there is nothing placed at that location. Also, you may also try taxi the airplane along the forest north to the rest of the fly-in neighborhood? Maybe it has to do with vegetation?

    10 months ago

    There is no vegetation where this occurs, only a dirt patch. I have also taxied all over the airport and have not seen this anywhere else. I have never seen this at any other airport either.

    11 months ago

    Lovely piece of work thank you!

    Could we have a windsock - I couldn't see one - apologies if I missed it
    cat3dualAuthor

    11 months ago

    Hi @FERG, certainly. The windsock was omitted because the default one was too big to mount on top of the hangar. We will include a custom one in the next update, stay tuned.
    cat3dualAuthor

    10 months ago

    Hi @FERG, we've added a windsock above the hangar in the latest update. Enjoy!

    11 months ago

    Nice, Thank you!

    11 months ago

    Thank you!
    MSFS 2020MSFS 2024

    W13 - Eagle's Nest Airport

    Waynesboro Eagles Nest Airport (W13) is a public-use airport situated in Virginia, featuring a 2,004 x 50 ft asphalt runway. This add-on enhances the airport experience with added pavement coverage, custom buildings including an FBO and maintenance hangar, and various default objects throughout the fly-in community. The airport supports RNAV approaches and includes amenities such as aircraft rental, maintenance services, and 100LL fuel.

    Downloads1K
    Version1.1
    File Size40.07 MB
    Published11 months ago
    Updated10 months ago

    User Reviews

    5.0

    4 reviews

    5
    100%
    4
    0%
    3
    0%
    2
    0%
    1
    0%

    More Information

    Simulator
    MSFS2020/24
    CategoryAirports
    ICAOW13

    Version History

    Added custom windsock above the hangar, as the default windsock cannot be resized and it is too big for this location.

    Related

    09J - Jekyll Island Airport

    09J - Jekyll Island Airport

    Explore the scenic Jekyll Island Airport (09J) in Georgias Golden Isles with this add-on. The airport features a single runway with an FBO building and unique amenities like a golf-cart rental agency. Enhancements include custom buildings, runway details, windsocks, and more. Simply extract the files into your "Community" folder to enjoy this detailed recreation.

    by cat3dual

    5.0
    KARW - Beaufort Executive Airport

    KARW - Beaufort Executive Airport

    Beaufort Executive Airport (KARW) is a public airport located in southeast South Carolina, featuring a single 3400ft runway and various facilities for pilots, including T-hangars and an FBO. This add-on enhances the airport with improved pavement textures, a handcrafted FBO building, and accurately placed airfield lighting. It includes detailed airport infrastructure, such as taxiway signs and an obstruction light on the windsock, all tailored for Microsoft Flight Simulator 20 and 24.

    by cat3dual

    5.0
    KDNL - Daniel Field Airport

    KDNL - Daniel Field Airport

    KDNL - Daniel Field Airport is a general aviation facility located in Augusta, Georgia, notable for its role during the Masters Tournament. The add-on features a custom control tower and hangars, along with enhanced lighting and signage, offering an accurate representation of the airport. Users can expect improvements such as pavement rework, custom props, and basic models of nearby fast-food restaurants in the FS20 version. This enhancement is compatible with both FS20 and FS24, each tailored for the respective platforms imagery.

    by cat3dual

    4.3
    KBXG - Burke County Airport

    KBXG - Burke County Airport

    KBXG - Burke County Airport is situated in southeast Georgia, approximately 30 miles south of Augusta. This add-on features an updated airport layout based on June 2023 imagery, including a newly extended 5000 ft runway, a parallel taxiway, and a custom FBO building. Enhancements also include a dedicated Ag Ops area, runway signs, and detailed visual elements such as a segmented circle and FAA rotating beacon, reflecting ongoing developments at the airport.

    by cat3dual

    0.0