Description
This is a very first set of scripts for the Cessna 414.
Please keep in mind that different scripts are needed for the autopilot. The GNS530 liveries do need the ap_generic_xxx scripts. The GTN750 liveries do need the ap600_xxx scripts.
If you prefer to use the new WTT addon to link the GTN750 with the C414 AP have a look at my WTT APGA scripts.
Thanks to Collin and CopperNu I can provide scripts to control the interior lights.
It covers
- Full Autopilot support for the GTN750 variants
- Full Autopilot support for the GNS530 variants
- Transponder digits for the GNS530 variants
- Cabin pressurization
- DME
- Altitude Alert, digits and possible to inc/dec in 100 steps with complete wrap-around
- Altitude Alert: increase and decrease by 100 ft steps with next digit wrap-around, eg. 900 to 1000, 9900 to 10000
- Altitude Alert: increase and decrease by 1000 ft steps with next digit wrap-around, eg. 9000 to 10000
- Decision Height
- Alternator Left on-off-toggle
- Alternator Right on-off-toggle
- Master Bar on-off-toggle
- Master Battery on-off-toggle
- Avionics master switch
- Voltammeter up-down-set, up and down cyclic
- Magnetos including magneto bar
- Fuel pumps, primer, starter
- Deice switches
- Propeller phase sync
- Go-Around button on throttle as toggle
- Taxi lights, landing lights including retraction
- Annunciator tests
- Interior lights: increment, decrement, axis.
- Pedestral and cabin light: increment, decrement, on, off, toggle, axis
- Pilot & Copilot window
- EFB
- Control Lock
- Emergency Gear
- Door
The autopilot was tested for the GNS530 variant of the plane. Tests for the GTN750 will be done later.
The scripts for Alternators and Battery will handle the Master Bar as well. The scripts for the Master Bar will switch off Batt and Alternators as well.
Scripts for other switches will follow.
Cessna 414 scripts for Lorby's Axis And Ohs (AAO)
Enhance your Cessna 414 experience with this set of scripts designed for Lorbys Axis And Ohs. Enjoy full autopilot support, interior light control, transponder digits, cabin pressurization, DME, and more. Developed by Collin and CopperNu, these scripts cover a wide range of functionalities to elevate your flight simulation experience.
User Reviews
7 reviews
More Information
Version History
Updated scripts for - Alternators - Magneto Bar and Magneto Switches - Master Bar and Master Switch Added scripts for - Avionics Master Switch
Related
A2A PA-24 Comanche scripts for Lorby's Axis And Ohs (AAO)
Control the A2A PA-24 Comanche with ease using these scripts designed for Lorbys Axis And Ohs. Import the provided scripts into Axis And Ohs to map controls to your hardware. Enhance your flight experience with walkaround assistance scripts for a more immersive simulation. Compatible with MIDI devices like Behringer Xtouch and Korg nanoKontrol2 for seamless control.
by Ape42
Cessna 152X (WBSim/JPLogistics) Scripts for Lorby's Axis And Ohs (AAO)
Scripts to enhance control of the Cessna 152X Addon by WBSim/JPLogistics with Axis And Ohs software. Import and map scripts for various functions like lights, autopilot, and annunciator panel to your hardware. Explore new ways to interact with the aircraft, enabling control over a range of systems and components.
by Ape42
BlackSquare TBM 850 scripts for Lorby's Axis And Ohs (AAO)
Scripts package for BlackSquare TBM 850, designed for use with Axis And Ohs software. This addon includes scripts for controlling the TBM 850 aircraft and can be imported into AAO for hardware mapping. Scripts are also compatible with programs like spad.next and MobiFlight for alternative control options. No B-variables included, using Input Events instead for improved functionality and ease of use. Detailed instructions and screenshots provided for seamless integration and customization.
by Ape42
Cessna 172X (WBSim) Scripts for Lorby's Axis And Ohs (AAO)
Enhance your Cessna 172X experience with this addon, offering scripts for control within Lorbys Axis And Ohs software. These scripts allow for detailed management of various features within the aircraft, from audio panels to autopilot functions. Import and customize them in Axis And Ohs to streamline your flight operations seamlessly.
by Ape42
Comments(34)
Log in to join the discussion
Log Inover 1 year ago
4 months ago
about 2 years ago
I'd also like to have the three red buttons on the fuel computer too if possible.
about 2 years ago
about 2 years ago
over 3 years ago
it seems like "Propeller 1" and "Propeller 2" Standard Scripts don't control the Prop RPM Levers anymore... did this plane get custom scripts for this?
over 3 years ago
This script was fantastic but doesn't seem to work anymore after update X or update of the airplane....
over 3 years ago
Haven't been in the Cockpit of the C414 for a long time. I'll try to hop in and update the scripts where possible.
almost 4 years ago
Update please
about 4 years ago
Awesome work! Many thanks!!!!
about 4 years ago
Thanks for the great work, is there a chance for a 1000Step Alt increase Script with Wrap Around? i Would like to bind a toggle on my Honeycomb Bravo where i can select 100 increments or 1000 increments increase for the Altitude. Thanks :)
about 4 years ago
A simple wrap around is implemented for alerter_tenthousands_dec_flip and alerter_tenthousands_incc_flip
If you need a flip with increasing the ten thousands i can implement such scripts. Would be similar to alerter_complete_dec_100 and alerter_complete_inc_100 only for thousands.
about 4 years ago
Great, that scripts for 1000 wrap around would be amazing :)
And do you know what the Variables are for the Navomatic 800B Autopilot? I‘m searching the Pitch Command Wheel Variable, for binding it to the Honeycomb Bravo Autopilot
about 4 years ago
Is the Navomatic 800B the one for the GNS530 variant? If yes, i'm on it. It's partially implemented in the scripts as ap_generic_xxx . I will complete them as well, because i prefer the GNS530 over GTN750 ;-)
about 4 years ago
Yes its the one for the GNS530 equipped version. That sound amazing. Looking for the Updates :)
about 4 years ago
I implemented increase with wrap around for 1000 ft. Added missing commands for GNS530 variant AP (ap_generic_xxx) and transponder digits.
about 4 years ago
That was fast,thanks :)
I'm currently trying to get my head around the DH Knob, but i fail to do so :(
the Variable has to be
(L:XMLVAR_GROUND_RADAR_DH_HEIGHT_KNOB_Position,·Number)
But i can't get it to increase or decrease the DH Knob in the GNS530 Variant.
Maybe you have an idea
about 4 years ago
Scripts for Ground Radar Decision Height were added as decision_height_xxx.
They are using the standard events of the sim for this. No limitations are used for inc and dec.