Not Downloaded yet
Version 1.0
Initial Release January 20, 2021
Last Updated January 20, 2021
File Size 8.10 MB
Downloads 405
This file has been scanned for viruses and is safe to download.
Exclusive
Elgato StreamDeck Icon Packv 1.0
by Guenseli

These are Icons for the Elgato StreamDeck (or probably any similar hardware).You can use this for your own personal usage.
It is the current state as I made them, no claim for completeness.

Have fun with it!
And please consider a donation, as it took many, many hours of work, thx!

Pretty empty over here.


Pretty empty over here.

  • Launched January 20, 2021

    Initial release of this file just launched. Welcome aboard!


Pretty empty over here.

18 Comments
  • image
    Martievo
    February 10, 2021

    Hi how can i set up the APU Start & Battery 1 & 2?

  • image
    Guenseli replied Author
    February 11, 2021
    Guys I need more info if you ask me here ...

    First, I have uploaded some profiles, check there if the airplane you need is there.
    Second: WHICH AIRPLANE???
    image
    Martievo replied
    February 11, 2021
    i only fly the A320. found everthing but not for the Battery 1,2 and the APU Master APU Start & APU Bleed

    I want to Toggle it and show the Status on StreamDeck.
    Im using the FligthTracker PlugIN
    image
    Guenseli replied Author
    February 11, 2021
    FlightTracker plugin is not capable using the variables you need to switch APU, Batteries etc.

    It is controlled with L:Vaiables (if we speak about the FBW Airbus?)
    image
    Martievo replied
    February 11, 2021
    And if i set them as a Hotkey Switch? But i dont find them in the Controlls.
    image
    Guenseli replied Author
    February 11, 2021
    No, you can't assign them as hotkeys or anything else. You have to use variables and need a program to assign these variables like AxisAndOHs and its StreamDeck plugin

    As example some variables:
    L:A32NX_APU_BLEED_ON, Number
    L.A32NX_APU_MASTER_SW_ACTIVATED, Number
    L:A32NX_APU_START_ACTIVATED, Number

    For the batteries you need more complicated scripts
  • image
    OzzyMaverick
    February 03, 2021

    Thanks for Sharing, are you ok if i Upload a Stream Deck Profile with a few of your Garmin buttons? will reference this Icon Pack

  • image
    Guenseli replied Author
    February 03, 2021
    Hello,
    have you checked my other uploads?
    Or what do you miss?
    image
    OzzyMaverick replied
    February 03, 2021
    I've made one using Mobiflight for the 208B and the normal StreamDeck not the XL, was going to share it but wanted to ask your permission first as ive used your icons for the Garmin to make add more realism! they are great icons!
    image
    Guenseli replied Author
    February 03, 2021
    Ah, sorry I misread you first comment completely!
    Now I understand what you want!

    Yes, you can use them, many thanks for asking and glad you like them!
  • image
    maor561
    January 21, 2021

    hii thanks!!!!
    what is the command value for ING/START ---MODE NORM

  • image
    Guenseli replied Author
    January 21, 2021
    What aircraft?
    image
    maor561 replied
    January 24, 2021
    air plane A320
    image
    Guenseli replied Author
    January 24, 2021
    Come on, give a bit more infos if you'd like help!

    What is your target? Make switches work with Elgato StreamDeck? What plugin do you use?
    What kind of variables do you need?
    What A320? Standard or FBW Mod?

    Fuel switches (FBW Mod, do not know if it is valid for standard):
    write: TOGGLE_FUEL_VALVE_ENG1 and 2
    read: FUELSYSTEM VALVE SWITCH:1, Bool

    eng mode master:
    write: TURBINE_IGNITION_SWITCH_SET
    read: TURB ENG IGNITION SWITCH EX1:1, Enum
    image
    maor561 replied
    January 24, 2021
    hiii sorry...

    i am using:
    a320 FBW
    stream deck plagin : nguyenquyhy/Flight-Tracker-StreamDeck

    i am looking for : eng mode switch command + read
    image
    Guenseli replied Author
    January 25, 2021
    You can see the engine (master) mode switch above.
    However, you need different parameters (2 is for start, 1 for norm) and I think, the FlightTracker plugin is not able to send parameters.

    Also will it probably not be able to read the value "TURB ENG IGNITION SWITCH EX1:1, Enum"

    I use the LORBY AAO StreamDeck plugin where you can use all variables (K:, H:, L: and A:)
    image
    maor561 replied
    January 25, 2021
    thanks a lot!!!!!
  • image
    Klaatu
    January 20, 2021

    Thanks for sharing...

© Guenseli - All rights reserved. Any reupload or redistribution of this file without the author's prior written consent is forbidden.
This Flight Simulator 2020 Mod was created by Guenseli and shared in Utilities » Miscellaneous for Microsoft Flight Simulator.

Dedicated Link Improve Report