Description
Hello everyone, hope all is well.
All Variants Included: -900, -1000 , With and Without Cabin
Primary Changes (more will be added, updated, improved on):
- Major Flight Stability Increases (aircraft should feel much heavier on the controls) - Improvements Planned
- Rudder Effectiveness Decreased (mostly in-flight, will be improved)
- Brake and Autobrake Improvements (brakes should feel smoother, less jerky)
- Increased Ground Friction (initial roll requires thrust increase)
- Reduced Elevator Trim Speed (slightly, will be improved)
- Corrected Reference Speeds (speeds referenced by 3rd party apps - increased and corrected to real values)
- Slower Spoiler-On Deployment (mostly in-flight, spoilers seem unaffected) - Improvements Planned
- Reduced Gear Related Volumes (by 50% - optional)
Planned Future Updates:
- Improved Flare and Rotation Behavior (Requested/Planned, looking into this)
- Thrust Improvement (will be tuned correctly over time without using Global Scalars)
- Brake Improvements (looking into this)
- Control Effectiveness and Stability Tweaks (including ground tiller)
- Corrected Climb-Lift Ratios (looking into this)
- Improved Spoileron Limits (looking into this)
- Improved Spoiler Deployment (looking into this)
- Improved Fuel Flow (looking into this)
- Corrected Gear Visuals (contact points, gear compression rules)
- Possible Click Spot to Activate GSX Menu (may need help on this, F2GSX developer? Others? Might need an external application)
Note:
ChangeLog - Will provide changes made
INSTRUCTIONS-READ-THIS.txt - Will provide install instructions.
THANKS EVERYONE!
Happy to give back to this amazing community.
Enjoy
Comments(296)
Log in to join the discussion
Log InA
3 days ago
Hi.
I read some comments about installation problems. I Think the problem most user have is that they don't know where to put your unzipped file incl their folders.
I would try the follwing way (correct me if i'm false):
1. i have the zipped file "A50TuningFS2020_RL8UZ.zip" on a USB-Stick and i unpack it on the same stick.
2. the folders in this USB-Stick e.g. "IN_FOLDERS" & "ORG_BACKUP" etc i would fill up with data as your manual it described.
3. after everything is done i would execute the script "CFGPORT.PS1" (also on the USB-Stick)
--> is that all?
If not please tell us where to copy "A50TuningFS2020_RL8UZ.zip" and unzip it and execute "CFGPORT.PS1". In the community folder? I dont know....
thank you
regards
I read some comments about installation problems. I Think the problem most user have is that they don't know where to put your unzipped file incl their folders.
I would try the follwing way (correct me if i'm false):
1. i have the zipped file "A50TuningFS2020_RL8UZ.zip" on a USB-Stick and i unpack it on the same stick.
2. the folders in this USB-Stick e.g. "IN_FOLDERS" & "ORG_BACKUP" etc i would fill up with data as your manual it described.
3. after everything is done i would execute the script "CFGPORT.PS1" (also on the USB-Stick)
--> is that all?
If not please tell us where to copy "A50TuningFS2020_RL8UZ.zip" and unzip it and execute "CFGPORT.PS1". In the community folder? I dont know....
thank you
regards
a
27 days ago
Can I use this with yourcontrols? Or will it bug something
a
29 days ago
i need 3 hours to understand how to install !!!!
what is that!?
what is that!?
j
about 1 month ago
Is it compatible with FS24 and new version 1.2.6? Thanks!
K
2 months ago
Thanks T4NM4N, everything works in MSFS2020!!!
Looking forward to continuation or addition.
Looking forward to continuation or addition.
A
3 days ago
Hi.
It looks like you where successfull!
Can you answer my question?
thank you
regards
It looks like you where successfull!
Can you answer my question?
thank you
regards
S
3 months ago
it doesent work for me i excracted the file and put in the community put it doesent show
k
4 months ago
Can you do a tutorial how to install
G
4 months ago
I'm having a lot of trouble with the part where the installation asks me to copy the aircraft directory into the folders. How do I do that? Can anyone help?
F
6 months ago
Will there be any future updates or did sloppy inibuilds shut you down
d
7 months ago
Thank you for your effort!! Does this addons work with v1.1.6 ?
M
9 months ago
Make the installation easyier....
s
9 months ago
You literally have to do 3 steps to install this enhancement. Just read the Instructions, its not difficult
M
9 months ago
Yes i follow the step and what folder should be deleted and what should stay? What about the INI_FOlders and OUT_ COMMUNITY ? should the folder from OUT_COMMINITY be copy to msfs community folder or not? :S
s
8 months ago
Sorry for tha late reply, but there is literally a readme file, explaining the steps you gotta do.
STEPS:
1. Go to your FS COMMUNITY folder, find your Inibuilds aircraft directory (inibuilds-aircraft-a350).
2. COPY-then-PASTE this aircraft directory INSIDE the "IN_FOLDERS" location (copy-only! leave the folder in FS COMMUNITY):
- " inibuilds-aircraft-a350 "
3. DOUBLE-CLICK on "CFGPORT_RUN.cmd" to start the script.
(When prompted about MSFS Layout Generator.exe BOTH (2) times, accept or click "Run".)
4. When promted, press any key to finish.
5. Open folder "OUT_COMMUNITY", then Copy & Paste mod folders to your FS COMMUNITY folder.
6. Fly!
If you have the MSfs2024 Microsoft store edition, you can find your COmmunity folder here: " C:\Users\YOURUSERNAME\AppData\Local\Packages\Microsoft.Limitless_8wekyb3d8bbwe\LocalCache\Packages\Community "
STEPS:
1. Go to your FS COMMUNITY folder, find your Inibuilds aircraft directory (inibuilds-aircraft-a350).
2. COPY-then-PASTE this aircraft directory INSIDE the "IN_FOLDERS" location (copy-only! leave the folder in FS COMMUNITY):
- " inibuilds-aircraft-a350 "
3. DOUBLE-CLICK on "CFGPORT_RUN.cmd" to start the script.
(When prompted about MSFS Layout Generator.exe BOTH (2) times, accept or click "Run".)
4. When promted, press any key to finish.
5. Open folder "OUT_COMMUNITY", then Copy & Paste mod folders to your FS COMMUNITY folder.
6. Fly!
If you have the MSfs2024 Microsoft store edition, you can find your COmmunity folder here: " C:\Users\YOURUSERNAME\AppData\Local\Packages\Microsoft.Limitless_8wekyb3d8bbwe\LocalCache\Packages\Community "
...
MSFS 2020MSFS 2024
Airbus A350 - Flight Tuning And Improvement Project
The Airbus A350 - Flight Tuning and Improvements Project introduces significant modifications aimed at enhancing the flight experience of the aircraft. Key updates include improved flight stability, adjusted rudder effectiveness, corrected reference speeds, and increased ground friction. This mod affects all A350 variants and includes a detailed "Read-Me" file for installation instructions and comprehensive change logs. Future updates are planned to further refine aircraft performance metrics.
Downloads12K
Version1.0.3
File Size634.00 KB
Published1 year ago
Updated11 months ago
User Reviews
4.8
45 reviews
5
91%
4
7%
3
0%
2
0%
1
2%
More Information
Simulator
MSFS2020/24
CategoryAircraft Enhancements
Sub-CategoryRealism Mods
Affiliation
iniBuilds A350 Airliner
Version History
V1.0.3: --Thrust Scalar - Reverted --Spoileron Deploy Time - Reduced --Gear Related Volumes - Reduced 50% (optional) --Glideslope Warning - Reduced 50% (optional) --New CFGPORT Method --New Manifest Files
about 2 hours ago
go to the flight simulator community folder eg: "C:\Users\urname\AppData\Roaming\Microsoft Flight Simulator\Packages\Community"
then find "inibuilds-aircraft-a350" ctrl+v or copy it then go to A350TuningFS2020 or the 2024 and find "CFGPORT" open that then you going to go open IN_FOLDER and then inside that press ctrl+v or paste in the content you copied then go back to CFGPORT and run "CFGPORT_RUN.cmd", one that is done open the folder OUT_COMMUNITY and copy all the files in it and go back to "C:\Users\urname\AppData\Roaming\Microsoft Flight Simulator\Packages\Community" and paste in the files you copied earlier you can delete CFGPORT and A350TuningFS2020 or 2024.