English on Top - Español Abajo
GSX Profile for SKBO Bogotá El Dorado International Airport by VPilot Designs - Version 3.1
This is an updated release of the GSX profile for the pay ware scenery SKBO El Dorado Intl by VPilot Designs. Profile for gates was made to resemble reality as much as possible and uses the latest Colombian AIS information from Aerocivil Colombia – May 18, 2023 & Aerocivil Colombia’s Document AIC 03/2014 regarding the VDGS system at SKBO.
Custom Python Script:
- 2 Files to choose from:
- SKBO_JCPR_ES: Relabels gates with Spanish names.
- SKBO_JCPR_EN: Relabels gates with English names.
- Custom Stop position: All gates and positions in the scenery have custom stop positions dependent on the airplane type.
- New Gate Names:
- Terminal 1 - International – Gates 22-62
- Terminal 1 - Domestic Concourse A – Gates 71-89
- Terminal 1 - Domestic Concourse B – Gates 11-20
- Terminal 1 – Remote Stands – Stands 101-107
- Terminal 2 - Puente Aereo – Gates 1F-10F
- Cargo Apron - International – Ramp 10E-17E
- Cargo Apron - Domestic – Ramp 2E-5E
- Colombian Air Force - Military Air Transport Command
- Colombian Army
- Colombian National Police
- General Aviation - 14L
- Remote Stands – Stands 18E-28E
- Engine Testing
Features for all gates:
- VDGS (Gates 22, 24, 27, 29, 34, 39, 41, 43, 45, 47, 49, 82, 83, 84, 85, 86, and 87As per AIC 03/2014)
- Marshaller – If applicable, the marshaller has been positioned properly within the scenery
- Corrected Stop Positions
- Underground refueling system
- Custom pushback paths in accordance with the corresponding pushback spots as defined in the Colombian AIS.
- Custom vehicle locations for each gate
- Gates F1-F10 have been customized to use the new GSX passenger walkers to model passengers boarding/deboarding without the bus and walking to the terminal.
Installation:
1. Delete any files in %APPDATA%\Virtuali\GSX\MSFS that start with SKBO
2. Extract the .zip file and move the NEW .ini file to %APPDATA%\Virtuali\GSX\MSFS
3. Move EITHER SKBO-JCPR_EN.py OR SKBO-JCPR_ES.py python files to %APPDATA%\Virtuali\GSX\MSFS
4. If installed correctly there should be only 2 files starting with SKBO in the %APPDATA%\Virtuali\GSX\MSFS folder: one ending in .ini and another in .py.
IMPORTANT:
1. REMEMBER TO REPOSITION AT THE GATE WITH GSX AT THE START OF THE FLIGHT.
2. THIS PROFILE WAS CREATED WITH GSX VERSION 2.93.
3. THIS PROFILE WAS TESTED AND CREATED WHILE HAVING THE ‘SU12 NAVDATA API’ OPTION IN GSX ACTIVE! IT HAS NOT BEEN TESTED WITHOUT THIS OPTION ACTIVE.
4. ONLY ONE PYTHON FILE (.py) FILES CAN BE IN THE %APPDATA%\Virtuali\GSX\MSFS FOLDER!!!
Troubleshooting in Case Profile doesn’t Load:
Please send me a message if you encounter an error or any other issues. This should work as any other
standard GSX profile.
Happy Flights!
JCPR
--------------------------------------------------------------------------------------------------------------------------------------
Español:
Perfil GSX para SKBO Bogotá El Dorado International Airport de VPilot Designs - Versión 3.1
Este es el perfil de GSX para el escenario pago SKBO El Dorado Intl de VPilot Designs. El perfil se construyó lo más cercano a la realidad y usando la última información de la base AIS de la Aerocivil Colombia a Mayo 18, de 2023 & el documento AIC 03/2014 de la Aerocivil que detalla el sistema VDGS de SKBO.
Código Personalizado de Python:
- 2 archivos para escoger:
- SKBO_JCPR_ES: Cambia los nombres de las posiciones en GSX con nombres en español
- SKBO_JCPR_EN: Cambia los nombres de las posiciones en GSX con nombres en ingles
- Posiciones de parada personalizada: Todas las puertas del escenario tienen puestos de parada personalizada que varían según el tipo de avión usado.
- Nuevos nombres de puertas en GSX:
- Terminal 1 - Muelle Internacional - 22-62
- Terminal 1 - Muelle Nacional Espigón Sur - 71-89
- Terminal 1 - Muelle Nacional Espigón Norte - 11-20
- Terminal 1 - Muelle Nacional Remoto - 101-107
- Puente Aéreo - Terminal 2 - 1F-10F
- Terminal de Carga - Internacional - 10E-17E
- Terminal de Carga - Nacional - 2E-5E
- CATAM - Fuerza Aérea Colombiana
- Ejército Nacional de Colombia
- Policía Nacional de Colombia
- Aviación General - 14L
- Posiciones Remotas - 18E-28E
- Prueba de Motores
- Posiciones de parada personalizada se verán en la PROXIMA actualización debido al alto numero de puertas para personalizar.
Características para todas las Puertas:
• Sistema VDGS (Solo puertas 22, 24, 27, 29, 34, 39, 41, 43, 45, 47, 49, 82, 83, 84, 85, 86, and 87 basado en AIC 03/2014)
• Paletero (guía de aviones) – Si aplica, se posesiono correctamente en el escenario
• Posiciones de parada corregidas
• Sistema de combustible subterráneo
• Puntos (Spots) de retroceso personalizados para cada puerta de acuerdo con el AIS de la
Aerocivil Colombia
• Posiciones de vehículos personalizados para cada puerta
• Las puertas F1-F10 hacen uso de los nuevos pasajeros caminantes de GSX que modelan a los
pasajeros abordar/desabordar los aviones caminando desde la terminal hasta el avión sin el uso de
buses.
Instalación:
1. Borre todos los archivos en %APPDATA%\Virtuali\GSX\MSFS que empiecen con SKBO
2. Extraiga el NUEVO archivo ‘.ini’ en %APPDATA%\Virtuali\GSX\MSFS
3. Mueva SKBO-JCPR_EN.py O SKBO-JCPR_ES.py a %APPDATA%\Virtuali\GSX\MSFS
4. Al final, si se instaló correctamente, debería haber solo DOS (2) archivos en la carpeta que empiecen con SKBO: uno que termine en .ini y otro en .py.
IMPORTANTE:
1. RECUERDE REPOSICIONARSE EN LA POSICION DE PARQUEO CON GSX AL INICIAR UN VUELO DESDE SKCL
2. ESTE PERFIL SE CREO CON LA VERSION 2.93 DE GSX.
3. ¡OPCION DE ‘SU12 NAVDATA API’ ACTIVADA EN GSX! NO SE HA PROBADO SIN ESTA OPCION ACTIVADA.
4. ¡SOLO UN ARCHIVO DE PYTHON (py) PUEDE ESTAR EN EL FOLDER %APPDATA%\Virtuali\GSX\MSFS!
En caso de que el Perfil no Funcione:
Por favor envíe un mensaje si encuentra algún error u otro problema. Esto debería funcionar como
cualquier perfil de GSX estándar.
¡Felices vuelos!
JCPR
9 days ago
7 days ago
JuanKP
JuanZapata04
26 days ago
25 days ago
JuanKP
wolfmaster8
No logro ver VDGS en El Dorado...Tengo la version especifica para este perfil ...Me puedes ayudar?
3 months ago
3 months ago
JuanKP
rodrigoluk
3 months ago
3 months ago
JuanKP
sebas2289
6 months ago
6 months ago
JuanKP
jmp20071210
9 months ago
9 months ago
JuanKP
vigardin
9 months ago
9 months ago
JuanKP
jf96g
9 months ago
9 months ago
JuanKP
torskenn
Hey pal I haven't been using the GSX profile addons until now, but I 've been looking at other airport profiles and the authors do not mention anything about a dummy file or any warnings other than to place the file on the correct folder on the C drive. What is different with yours? I'm I missing something? I don't want to start adding these files until I know what I'm doing.
Thanks
11 months ago
Hey,
For version 1.1 No difference, you use the GSX profile file as any other airport - no need for any other files other than the standard .ini file.
As this airport was originally only available through the MarketPlace, the original profile (V0.5 and V1.0) needed an auxiliary AFACD file in order to work. So unless you don't have the API option in GSX use version 1.1 of the profile. If not then you'll have to revert to using version 1.0 and the additional AFCAD file - it's up to you.
11 months ago
JuanKP
perohijo
awesome! muchas gracias! can u make one for V pilot Designs MPTO (tocumen) and V pilot Designs MROC (san jose) ?
11 months ago
I am glad you liked it! Thank you for the request. However, I don't own MPTO or MROC sceneries. If I buy them I will most likely make a profile for them. However, I am not planning to purchase those in the near future.
11 months ago
JuanKP
hawaiianstyle78
Muchas gracias! Me funcionó con el método de la V1.0. Con el de la V1.1 no tuve resultados.
1 years ago
Gracias! Si te entiendo correctamente: Si usas unicamnte el archivo "SKBO-04rrin.ini", no te funciona?
1 years ago
JuanKP
FaJuGo
No funciona desde el SU11. Favor arreglar.
Gracias por el trabajo
1 years ago
Hola - No se que pueda ser porque lo he podido usado sin problema desde SU11. Si tiene mas detalles mandeme un DM y le trato de ayudar.
1 years ago
JuanKP
jdp_323
no encuentro el archivo bgl por ninguna parte
1 years ago
Para cual version? - La version 1.1 SOLO tiene un archivo .ini que termina en 04rrin y pesa ~160 kb, la version 1.0 tiene el archivo BGL y archivo .ini que termina en uktk64 y pesa ~240 kb. Acabo de revisar la pagina de descarga y ambas opciones aparacen ahi.
1 years ago
JuanKP
jdp_323
Hey I was able to get the profile to work, but I believe the bgl you provide is not being read, even after changing the path. My suspicion is because I cant spawn on gates such as 79 and 80.
Any ideas?
Thanks
1 years ago
When I created the AFCAD file, I only created the gates that VPilot Designs had available for use. Gates 80 and 79 were not usable in the original scenery even if they had been modeled. I'll be updating the profile in the near future to take advantage of GSX's and Microsoft's updates so there is no need to have such a complicated structure. I may explore including additional parking spots in that update.
1 years ago
JuanKP
pipejaraara
Hey!
Its not working since SU11. 😞
1 years ago
Hi, I tested it last week but I'll take a look at it again. Any more specifics you can give on the issue you're experiencing?
1 years ago
JuanKP
SantiH99