Flightsim.to
    Advertisement by Pilops
    PMCO_FNX32X - Pilot Monitoring Callouts for the FENIX A319/A320/A321 add-on - Image 2

    Description

    First things first:
    If any problems arise, please contact me before writing bad reviews or giving one star ratings.  ;)
    >>>> Please always send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de after a flight you had problems with. <<<<


     

    This is a FSUIPC7 Lua plugin, which dynamically plays the callouts you would hear from the pilot monitoring (PM) in an Airbus A320 series flight deck during takeoff and landing (including rejected takeoff, go-around and touch-and-go). It is to be used with the FENIX A319/A320/A321 ONLY.

    ####  What it does:

    • The plugin runs automatically upon loading the FENIX A319/A320/A321 add-on.
    • Before takeoff, the V-speeds must be entered on the PERF page of one of the MCDUs (as usual).
    • The following callouts are included:
      • Takeoff: STABILIZED, FLEX SET / TOGA SET, AIRSPEED ALIVE, 100 KNOTS, VEE ONE, ROTATE, POSITIVE CLIMB, CLIMB SET
      • Landing: SPOILERS, REVERSE GREEN, DECEL, 70 KNOTS, AUTOBRAKE OFF
      • Gear confirmation: GEAR UP, GEAR DOWN
      • Flaps confirmation: FLAPS 0, FLAPS 1, FLAPS 2, FLAPS 3, FLAPS FULL
      • Special: STOP (rejected takeoff), STAND UP, GO (touch-and-go)

    PMCO_FNX32X (Takeoff Demo) - YouTube

    PMCO_FNX32X (Landing Demo) - YouTube

    ####  Important notes and prerequisites:

    • Registered version of FSUIPC7 (for MSFS) is required! The free version is not sufficient, unfortunately!
    • Please, follow carefully the included readme for installation instructions (PMCO and FSUIPC + WASM-module)!
      On request, there is now also a video, guidung you through the installation: PMCO_FNX32X (Install Guide) - YouTube
    • If MSFS is run as admin, FSUIPC7 must also be run as admin. Either both or none!

    ####  Credits:

    The default soundset was recorded by Nick Kidd. Big thanks to him!

     


    This (my Lua plug-in) is free to use. However, if you like my work and wish to donate, it would be greatly appreciated: paypal.me/payNilsU
    I wish you safe flights and happy landings!

    Log in to join the discussion

    Log In

    Comments(654)

    Pinned Comment
    dermobbAuthor

    about 1 month ago

    Please send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de after a flight you had problems with.
    Usually, I can see from those two files why it's not working.

    35 minutes ago

    Very Very useful utility when flying without copilot ...

    And would it be possible to have the same for the Inibuilds A350 ???

    about 16 hours ago

    Hello :) Just saw the update but to avoid any mistake this update consern what exactly ? Do I have to re install evrything ? or just some files ? Thank you :)
    dermobbAuthor

    about 4 hours ago

    You have to copy the included files over the existing installation of PMCO and overwrite it. You don't have to (and should not) reinstall FSUIPC or even the Fenix. It's just one single copy operation of a few files. You also don't have to edit the FSUIPC7.ini again.

    6 days ago

    A "must have" add-on!! Thanks for updating so promptly. ps the audio is excellent ;)
    Hello! I really love your PMCO addon for the Fenix A320, it adds so much immersion to my flights and I’ve been using it all the time.
    I just updated to the brand-new Fenix A32X V3, and unfortunately the addon no longer works with this new version.
    V3 has a completely revised internal architecture. Would you consider updating or porting PMCO to support Fenix V3?
    Really appreciate all your hard work!
    dermobbAuthor

    16 days ago

    I will have a look when I'm back from vacation. Bad timing, unfortunately. Next week I'm back home.

    about 1 month ago

    Noticedthat this hasnt worked for the last two flights I checked install and watched the You Tube Video. In the Install text it does not mention Enable WAPI.
    I have had a couple of FSUIPC updates, would this affect the installation?
    dermobbAuthor

    about 1 month ago

    I replied to the email you sent me.

    about 1 month ago

    Hi there,

    I just want to say your Fenix A320 voice callout plugin is absolutely incredible. It’s such a fantastic, well-crafted addon, and it has greatly improved my whole flight simulation experience. I really appreciate all the effort you’ve poured into this project.

    I have one small feature request. At the moment, during takeoff roll, the pack only plays "TOGA set" or "Flex set".
    On real Airbus aircraft, the PM reads out the active FMA modes after setting thrust:
    Man Flex (TOGA), SRS, Runway, Autothrust Blue

    Would you be open to adding this callout sequence in a future update?
    Just a note: the "Runway" call should only activate when the RWY guidance mode is shown on the FMA.
    This would make the takeoff SOP fully match real airline procedures and raise immersion to another level.

    Thank you again for this awesome addon!
    Best regards
    dermobbAuthor

    about 1 month ago

    I would have to fake all of this, as there is no way to read the FMA through variables (especially the FLEX temperature). There simply are no variables. I prefer not to just fake the callouts. What we have now is the best compromise I could come up with.

    If you really want to fake the sounds, you could record your own soundset. That's a possibility.

    Thanks for your kind words.

    about 1 month ago

    Many thanks for taking the time to explain this technical barrier to me. I completely get why you are reluctant to implement fake FMA callouts, realism is the core of this sim addon.
    I really appreciate all the hard work you put into this voice pack, it’s still my favourite callout plugin for Fenix A320.
    I may try creating my own custom soundset later.
    Cheers!

    about 1 month ago

    don`t work for me even do i have done this.
    dermobbAuthor

    about 1 month ago

    Please send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de after a flight you had problems with.
    Usually, I can see from those two files why it's not working.

    about 2 months ago

    Hello :) I have installed it before in MSFS2020 and as I now fly MSFS2024 I install FSUIPC for 2024 but I am not able to transfer files for MSFS2024 :( is there a way I can get help without taking to much of your time ? It would be very nice. Thanks
    dermobbAuthor

    about 2 months ago

    Please send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de from the FSUIPC install location for 2024. We will work from there.

    about 2 months ago

    Hello after a lot of work I made it myself so thank you again sir :) I love PMCO :)))

    3 months ago

    Hi, thanks for this wonderful addon. I have all 3 of your callout addons, fenix a320, pmdg 737, and pmdg 777. It works for the Fenix but not the others. Not sure if I put in the correct entries in the FSUIPC7.ini file correctly or not. This is what I have. Could you please verify:

    [Auto]
    1=Lua PMCO_FNX32X
    2=Lua PMCO_PMDG73X
    3=Lua PMCO_PMDG77X

    [LuaFiles]
    1=PMCO_FNX32X
    2=PMCO_PMDG73X
    3=PMCO_PMDG77X
    dermobbAuthor

    3 months ago

    What you show is correct, there might be other reasons for it to not work / start. Please send me FSUIPC7.ini and FSUIPC7.log via email after a flight with the PMDG aircraft. I need those files for debugging.
    ...
    MSFS 2020MSFS 2024

    PMCO_FNX32X - Pilot Monitoring Callouts for the FENIX A319/A320/A321 add-on

    This is a FSUIPC7 Lua plugin, which dynamically plays the callouts you would hear from the pilot monitoring (PM) in an Airbus A320 series flight deck during takeoff and landing (including rejected takeoff, go-around and touch-and-go). For FENIX A319/A320/A321 ONLY.

    Downloads24K
    Version1.12
    File Size5.9 MB
    Published4 years ago
    Updated5 days ago

    User Reviews

    4.9

    106 reviews

    5
    93%
    4
    3%
    3
    0%
    2
    0%
    1
    0%

    Version History

    added: >>> support for Fenix V3 (there were flaws with some variants...)

    Related