This is a recreation of the St. George Regional Airport in St. George, Utah. I used all available SDK objects to add buildings, taxiways, signage, parking and much more. The airport now has taxiway signage that matches the actual airport, or at least as accurate as I can see with my binoculars standing outside the fence :).  I also fixed the taxiway lighting and added the MALSR runway approach lights.  All parking (FBO and off taxiway B) is now painted and setup as departure or destination choices.  

I am not a pilot and do not have access inside the airport but if you are a pilot that flies in and out of KSGU regularly and see something wrong with the taxiway signs; by all means let me know, and I will update it.

*** Please Read

I was helping a friend install MSFS and I realized I mistakenly thought that all the scenery available in the software development kit (SDK) would be included with every base version of MSFS. What I didn’t know was that the SDK also includes scenery from any updates and add-ons you have on your system at the time you are doing development. So it turns out some of the scenery I used was from those add-on and updates and if you don’t have the same updates and add-ons that I used for the airport then you are not seeing all the changes I made. I recently lost my development files for the version you can download but I was able to go through and determined which updates and add-on you will need and I listed them below in the installation section along with what scenery it provides. I also included the file size so you can decide if the scenery provided is worth the disk space.

Installation instructions: Click on the large green download button below. It should be version 1.5. This will start a download counter and when complete, will display a start download button on the pop-up screen. Clicking this button will place a zip file in your download folder or the folder you have chosen with a file name of rb-airport-ksgu-stgeorgeregional_ver1_5_APw0z.zip.

Once the St. George Regional Airport zip file is downloaded:

• Using a zip program, unzip the file and place the 2 folders contained in the zip file into a folder on your hard drive.
• Your folder will contain two folders: rb-airport-ksgu-stgeorgeregional and turtletank1997-scenerydevkit
• Copy those 2 folders into your Community folder. As an alternative to the previous step, you can also extract the folders directly to your Community folder.
• You will need to download the following updates and add-on to see all the scenery
  • From Content Manger download

    Update II: USA 6.27GB

    - Small buildings located next to localizer and MALSR runway approach lights
    - Orange and white ring around the lighted windsock

    Update III: United Kingdom and Ireland 6.39GB

    -One building in FOB
    -Light Pole by refueling on taxiway B

  • From Marketplace download

    EDLP PADERBORN-LIPPSTADT Airport from AEROSOFT 1.25GB (free add-on)

    -Around half the buildings in the FOB
    -Glide Slope antenna and building
    -Lighted Windsock

• That’s it, open MSFS 2020 and enjoy.

*********** Changes for version 1.5 ************

It appears at some point the St. George VOR (UTI) object I had for the airport disappeared or is no longer available, so I added another VOR from the current SDK.

*********** Changes for version 1.4 ************

I updated the terminal parking to reflect the latest changes at KSGU.  They extend the ramp with blacktop next to ramp parking spot 3 and now have a ramp 4 parking spot. They also have renumbered the gates 1-3 with gate 2 now on the jetway, so I updated the parking numbering.  Ramp parking 3 and 4 are accessed through gate 3 in the terminal.  I also added the windsock by the fire station and one by the PAPI lights on the 19 end of the runway.  

*********** Changes for version 1.3 ************

I have added runway distance signs thanks to the scenery library created by TurtleTank1997.  You can find the latest version of his scenery here: TurtleTank's Scenery Developer Objects and Material Library

Log in to join the discussion

St. George Regional Airport (KSGU) Airport

This is a recreation of the St. George Regional Airport in St. George, Utah. I used all available SDK objects to add buildings, taxiways, signage, parking and much more. The airport now has taxiway signage that matches the actual airport, or at least as accurate as I can see with my binoculars standing outside the fence :).  I also fixed the taxiway lighting and added the MALSR runway approach lights.  All parking (FBO and off taxiway B) is now painted and setup as departure or destination choices.

Version History