Flightsim.to
    Autothrottle for JustFlight Fokker F28 Fellowship - Image 2

    Description

    Auto-throttle for the JustFlight F28 Fellowship

    This is a plugin that adds a very simplistic emulation of auto-throttle to the great F28 Fellowship family by JustFlight. I have created it mostly to check out how plugin development for the MSFS works and managing throttle of F28 while in cruise is always a boring task for me, especially if there is a busy airspace around and I may be distracted. 

    It was tested with v1.3.0 of JF Fokker F28. It is important to note, that it overrides the F28’s panel.cfg — whenever JF will change anything with it (for example adding UNS fmc, other GPS options, and so on) this mod will need to be updated. Also, important note is that testing was mostly done on The F28-1000 and it is likely that further tuning will be required on other variants of the family. It is something I'll get to in the near future, along with overall tuning and smoothening of throttle operation (as can be seen from the preview video, they can be a bit jumpy).

    Operation
    • The mod supports default MSFS bindings for “AUTO_THROTTLE_ARM” and “AUTO_THROTTLE_DISCONNECT” to engage/disengage.
    • When engaged — white (inner) marker beacon light next to the speed brake and trim indicators is illuminated.
    • The target speed is read from the left (captain) ASI and can be changed by rotating the left speed bug.
    • Caution: whenever you click on the card with reference speeds for landing — it also sets a bug, so be ready that AT will try to slow down to Vref + 5 when you click on card to set Vref/flap markers.
    • At 50 feet AGL auto throttle disconnects to allow for speedbrake operation while in air and facilitate precise control while flaring. That being said, I suggest flying final approach manually as now the AT has no information about winds, being in high- or low-energy state
    Known limitations
    • AT is inoperable at or below 50 feet AGL
    • AT has some inherent oscillations when capturing speed, especially when engaged with large difference between target and actual speed. This is something I’ll look into in the future updates.
    • AT can dip below target speed when acquiring it from a higher speeds. However in testing these dips were no more than 5-8 knots and were corrected quickly enough.
    • AT should not be used for the approaches, especially in very gusty conditions as it was not a design feature for this plugin at the moment. That being said, in initial testing it was able to hold speed at Vref+5 in moderate winds and gusts. But also, where is fun in that?

    Installation

    Unzip the archive and folder into your community folder.

    Then in your community folder find `justflight-aircraft-f28\SimObjects\Airplanes\Just Flight Fokker F28-4000\panel\panel.cfg`, make a back-up of it, and then (no, I mean it, make a back-up) file and add following block:

    [VCockpit12]
    size_mm=0,0
    pixel_size=0,0
    texture=NO_TEXTURE
    background_color=42,42,40
    htmlgauge00=KnidarknessVFEGauge/VFE.html, 0,0,1,1

     before the "views" block (as of update v2 on line 98)

    [VIEWS]
    VIEW_FORWARD_DIR=2.000, 0.000, 0.000

    Log in to join the discussion

    Log In

    Comments(47)

    8 months ago

    Brilliant add-on, works amazingly well - makes the F28 much more able to do longer flights without having to constantly monitor speed

    8 months ago

    Very helpful. Thanks for sharing

    about 1 year ago

    Unfortunatly not working with the 2.2 update

    about 1 year ago

    This did work very well in 2024 until they just did an update for the F28... Now it doesn't

    about 1 year ago

    Oh, thanks for letting me know -- I will check over the weekend!

    about 1 year ago

    it does work for me just after you install the mod I did place the layout.json to the layout generator and it worked

    over 1 year ago

    Will this still work for version 2 of the F28?

    over 1 year ago

    Sorry, my fault I have to name it to block 12 as I already have block 10 and 11 in original panel directory.
    Excelent mod, I have not tried it in the PMDG DC-6 yet, but will do that shortly.
    Best Regards

    over 1 year ago

    Thank you, added comment about needing to add it as 12th block.
    FWIW, it's only for f28, won't work with DC-6 :(

    over 1 year ago

    Well, the idea of this mod is excelent as in the FSS B727-200F. unfortunaly it does not work for me-
    Running msfs 2020 and I have insert the block 11 just under the block 10 in the config file of simobjects panel directory . No response at all, I bind the AUTO_THROTTLE_ARM” and “AUTO_THROTTLE_DISCONNECT” to my TCA Boeing quadrant but no result. The standard binding key in the keybord does not give any result either. Very sorry for that as I realy would have such a mod.
    Any idea or suggestions would be greatful
    Thanks in advance
    Bjorn

    over 1 year ago

    Thanks for this mod! It works fine with v2 in MSFS2024. As @DankWilliams suggested it's only needed to use [VCockpit12] instead of [VCockpit10] because that one is already taken in the default panel cfg file.

    over 1 year ago

    Awesome mod dude! It seems to be working in 2024 with the v2 F28, just had to change [VCockpit10] to [VCockpit12] in the cfg

    over 1 year ago

    Thank you, added comment about needing to add it as 12th block.

    over 2 years ago

    Hi since installing the mod i cant exit an app on the EFB

    over 2 years ago

    (When i changed the panel.cfg)
    MSFS 2020MSFS 2024

    Autothrottle for JustFlight Fokker F28 Fellowship

    Add auto-throttle functionality to your JustFlight Fokker F28 Fellowship with this plugin. Engage/disengage with default MSFS bindings and adjust target speed easily. Please note known limitations and follow installation instructions for optimal performance.

    Downloads935
    Version1.1
    File Size288.68 KB
    Published3 years ago
    Updated3 years ago

    User Reviews

    5.0

    9 reviews

    5
    100%
    4
    0%
    3
    0%
    2
    0%
    1
    0%

    Version History

    - Tuned PID coefficients for a smoother throttle input and to reduce throttle jittering/jumping

    Related