Flightsim.to
    Failure Engine - Image 1

    Description

    This application randomly fails an engine. 
    This utility will help develop and maintain multi-engine proficiency by failing an engine when you need it most.

    How does it work?

    • Choose a speed range where a failure can occur.  Ideally a failure will happen between rotation speed and normal climb speed.  
    • Increase or decrease the probability that a failure will occur.
    • Three failures may occur:
      • Catistrophic engine failure
      • Engine fire
      • Turbocharger failure (piston engines only).
    • Up to 4 engines supported.
    • Clear the failure at anytime and continue your flight.

    How do I install it?

    • Unzip the downloaded file and run Setup.exe.
    • Run FailureEngine.exe 

     

    Repaint pictured credit to : jamespejam

    Log in to join the discussion

    Log In

    Comments(20)

    3 months ago

    my antivirus says its a trojan

    11 months ago

    Doesn't seem to work on fbw a32nx

    almost 2 years ago

    i cant access it

    almost 2 years ago

    Hi! Just downloaded it and it shows this message: You cannot start application Failure Line from this location because it is already installed from a different location.
    Any suggestion? Thanks!

    over 2 years ago

    It says that engine 1 failed, but there is no change in RPM or anything else.
    ( i am using a 747 )

    almost 3 years ago

    Amazing simple module that enables the layer of tension that we were missing. Just flew a DC-3 flight in Norway for 1,5 hour with the settings in minimal and nothing happened, which is exactly what it should do. I was all the time on my toes as I should but managed an uneventfull flight despite the weather.
    Thank you for using my PanAm livery as thumbnail too!
    Keep evolving this tool, it could be a really cool payware.
    carthorseAuthor

    almost 3 years ago

    Thanks for this review, it made me laugh!
    I definitely need to spend some time improving this utility. Hopefully I will make a release sometime in the near future.
    carthorseAuthor

    almost 3 years ago

    Jamespejam,
    I fixed the bug where no failures occur unless you actually moved the slider.

    almost 3 years ago

    Could you make it fail on high revs, i.e. on take off rather than cruise speed, for example when the engine is under stress (high rpms, pressure etc... very high throttle), not just a t a certain speed, as take off is the most likely time for a failure.
    carthorseAuthor

    almost 3 years ago

    Hello, This is possible for a turbocharged piston engine as they experience higher cylinder pressures as you say, however it is not currently in my scope to model this. The best way to use this is to set a speed range that you would only experience during takeoff. You can always switch back to the utility and disable failures once you reach cruise.

    about 3 years ago

    Congratulations, this is so nice, but what's the language that u used? And where you found the documentation/way for create this?
    carthorseAuthor

    almost 3 years ago

    Hello i wrote it in dot net (c#). I used sim connect examples in the SDK.

    about 3 years ago

    If i were to do this in a FBW A320 Neo, would the fire alarms go off in the cockpit and simulate a proper engine fire?
    carthorseAuthor

    almost 3 years ago

    Maybe? It just calls the sim's engine fire failure, so it should do as you say.

    over 3 years ago

    Oh boy! That's all we need from this sim.. more failures! lol. I guess this is for those diehard suicidal maniacs out there that want to try to fly defective aircraft so they can attempt simulated death!

    over 3 years ago

    can you set it to off?

    carthorseAuthor

    over 3 years ago

    Yes, just uncheck the box.

    over 3 years ago

    So this works with any plane that has 1-4 engines?

    carthorseAuthor

    over 3 years ago

    Yes, correct.

    over 3 years ago

    Whoa! Great app, but I just wouldn't be able to take the suspense! :-)

    MSFS 2020MSFS 2024

    Failure Engine

    Failure Engine is a utility designed to induce random engine failures after takeoff and on approach. Get ready for a multi-engine checkride, fight complacency or simply enjoy the feeling of panic as your overloaded DC-3 loses altitude and threatens to roll over.

    Downloads931
    Version1.0.0.7
    File Size898.13 KB
    Published3 years ago
    Updated2 years ago
    Classification
    Utilities5.0 (1)

    User Reviews

    5.0

    1 reviews

    5
    100%
    4
    0%
    3
    0%
    2
    0%
    1
    0%

    Version History

    - fixed a bug where text was displayed when scrolling the probability slider.