Flightsim.to
    ORBX Prague (LKPR) - GSX Pro Config [Deprecated] - Image 1

    Description

    EDIT 21MAR23: Hi everyone! Since Tailstrike Prague has been released quite a while ago, I have decided to deprecate this config, because I am not even using ORBX Prague anymore, so I would have to install it to work on this profile. However, if anyone here would like to take the mantle with this profile, I'm more than willing to give it to someone.

    GSX Pro Custom Config for ORBX Prague

    Product:  https://orbxdirect.com/product/lkpr-msfs

    Included:

    • Custom APIS VDGS placement at relevant stands
    • Corrected vehicle placement as much as possible
    • Custom pushback routes, as GSX allowed me to do
    • Edited maximum wingspan to match the real life
    • Custom PAX paths from the terminal into the jetways

    Currently, only the Apron North (main apron) is customized!

    Place the .ini config into the AppData\Roaming\virtuali\GSX\MSFS

    Enjoy!

    Comments(30)

    Log in to join the discussion

    Log In
    S
    Sebas22

    over 3 years ago

    I bought the scenery via marketplace and the profile dosnt work for me. Could any one help me?

    D
    DarrianCZEAuthor

    over 3 years ago

    Hi. You will probably have to enable the Sim Update 10 Navdata API in the GSX Installer.


    Since I don't own the Marketplace version, this is probably the only advice I can give.

    S
    Sebas22

    over 3 years ago

    And how do i do that?

    D
    DarrianCZEAuthor

    about 3 years ago

    When you open the FSDT Universal Installer, you should see a Config button next to the GSX.

    t
    tronkialvaro

    over 3 years ago

    Hi,

    would it be possible to make a gsx profile for Tailstrike’s new LKPR? Or maybe this one works fine with it… idk

    D
    DarrianCZEAuthor

    over 3 years ago

    I have just released it :-)

    m
    molnazol

    over 3 years ago

    Hello

    Where i can find *.*.bgl file for ORBX LKPR (purchased), and how I have to modify the .ini file?

    THX a lot

    D
    DarrianCZEAuthor

    over 3 years ago

    Hi, you shouldn't have to modify anything. GSX should detect it by itself.

    B
    BJHawk

    over 3 years ago

    No matter what I do, I cannot get the GSX to detect ORBX LKPR and use your custom settings. Maybe the problem is I have MS Store version of ORBX LKPR?

    T
    Terblanche

    almost 4 years ago

    Thank you for your GSX update. Is there anything we could do to NOT make the jetways connect to the right front door (e.g. stand 20) or is that a GSX bug that needs to be fixed?

    D
    DarrianCZEAuthor

    almost 4 years ago

    Hi! GSX is not doing anything with the jetway system, it merely replaces the models, and then calls the default MSFS jetway system, so there is nothing which can be done about it, even from the FSDreamTeam side. This is purely MSFS.

    l
    laszlobarki

    almost 4 years ago

    HELP, PLEASE! How can i get VIRTUALI?? I can not find it anywere...

    O
    OfirMor

    over 3 years ago

    C:\Users\YOUR USER\AppData\Roaming\Virtuali

    l
    laszlobarki

    over 3 years ago

    Dear OfirMor, well, right THIS is the problem: I DO NOT HAVE anything like that in my MSFS-program! How could I get it??

    D
    DarrianCZEAuthor

    over 3 years ago

    You need to purchase the GSX Pro :-)

    c
    copper

    almost 4 years ago

    Awesome work!

    I have a small bug which I don't know if it's GSX or this profile: Departing from gate B 15, I had three options for the pushback:

    Juliet, Juliet Orange and Juliet Blue.

    Selecting Juliet brought me onto the orange line though, not sure if the labels are incorrect or the path.

    Other than that all worked really well, thank you a lot for the work!

    D
    DarrianCZEAuthor

    almost 4 years ago

    Hi! Thanks! I'll investigate. I have to admit, that I haven't tested everything before the release, so it's entirely possible that I have made some kind of a mistake.

    D
    DarrianCZEAuthor

    almost 4 years ago

    You were right, it was a slight mistake in how I expected GSX to behave. I have released a new version with revised pushback routes along Taxiway J and also the entire Pier C (Taxiway J + H1).


    Thanks for letting me know!

    c
    copper

    almost 4 years ago

    Thank you a lot for responding and fixing it! :)

    It's hard to test all the positions really, in all the combinations. So glad that you are able to adjust this. Will report if I find anything else when flying there.

    MSFS 2020MSFS 2024

    ORBX Prague (LKPR) - GSX Pro Config [Deprecated]

    Enhance your GSX experience with this custom configuration tailored for ORBX Prague (LKPR). This GSX Pro Config features custom APIS VDGS placement, corrected vehicle positions, pushback routes, and more to align with the real-life airport setup. Note: Only the Apron North area is currently customized. Simply place the .ini config file in the specified directory and elevate your ground handling simulation at Prague Airport.

    Downloads5K
    Version1.2
    File Size13.26 KB
    Published3 years ago
    Updated3 years ago
    DarrianCZE

    Community Creator

    10 addons • 22 followers

    User Reviews

    4.3

    3 reviews

    5
    67%
    4
    0%
    3
    33%
    2
    0%
    1
    0%

    More Information

    Simulator
    MSFS2020
    CategoryMiscellaneous
    Sub-CategoryGSX Pro Profiles
    ICAOLKPR

    Version History

    Corrected a mistake in pushback taxiway naming at Pier A

    Related

    Tailstrike Designs Prague (LKPR) - GSX Pro Config

    Tailstrike Designs Prague (LKPR) - GSX Pro Config

    Enhance your ground handling experience at Tailstrike Designs Prague airport with this custom GSX Pro config. Enjoy custom vehicle placements, pushback routes, and accurate stand details based on airport documentation. Choose between Aerosoft VDGS or GSX VDGS versions, following easy installation steps for an improved airport ground services experience. Note some known issues with stand recognition and jetways on alternate stands, but overall a great addition for a realistic airport experience.

    by DarrianCZE

    5.0
    Aerosoft Brno (LKTB) - GSX Profile

    Aerosoft Brno (LKTB) - GSX Profile

    Enhance your ground handling experience with this custom GSX Pro configuration for Aerosoft Brno (LKTB) in Microsoft Flight Simulator. This add-on offers custom passenger walk-in paths, vehicle placement, and stand groups and names. Simply follow the instructions to install the files and enjoy a more realistic airport environment. If you encounter any issues, dont hesitate to report them for further improvements.

    by DarrianCZE

    5.0
    Tailstrike Designs Prague (LKPR) - GSX Pro Config - LKPR Live Edition

    Tailstrike Designs Prague (LKPR) - GSX Pro Config - LKPR Live Edition

    This add-on provides a custom GSX Pro configuration specifically designed for Tailstrike Designs Prague Airport (LKPR) in Microsoft Flight Simulator. It features tailored vehicle placements, pushback routes, and custom stop positions based on airport documentation for enhanced realism. The LKPR Live edition is a specialized version that requires Fiideells modification to function properly. Note that specific adjustments are necessary for seamless integration, including disabling default VDGS to prevent model overlaps.

    by DarrianCZE

    0.0
    Asobo / Gaya Karlovy Vary (LKKV) - GSX Pro Config

    Asobo / Gaya Karlovy Vary (LKKV) - GSX Pro Config

    Customize your ground services experience with the Asobo / Gaya Karlovy Vary (LKKV) - GSX Pro Config add-on for Microsoft Flight Simulator. This mod offers custom passenger walk-in paths, vehicle placements, pushback routes, and stand groups. Simply follow the instructions to enhance your airport operations.

    by DarrianCZE

    0.0