GSX Profile for Kahului Airport, Maui, Hawaii (Northern Sky Studio)

- Custom pushbacks on all terminal gates & cargo stands
- GSE placement
- Cargo stands configured

**PLEASE NOTE**
- Be sure to reposition your aircraft after spawning into your gate
- Handler file included with mostly correct handling assigned (provisions have been made where the correct company isn't available in GSX)
- There isn't a Python file with this profile, aircraft positions will vary by type.

Configured gate/stand information below:

International Gates 1; 5; 7 (WestJet & Air Canada):
- 5: Medium - B38M used for the default positioning
- 1; 7: Heavy - B772 used for the default positioning

Gates 9; 11; 13; 15 (Southwest):
- All Small - B737 used for the default positioning
- Jetway boarding

Gates 17; 19; 21 (Hawaiian & Alaska):
- All Small - B738 used for the default positioning
- Jetway boarding
Note: 21 will reposition to 21B to allow sufficient room on either side of the gate for other aircraft

Gates 23; 27 (United):
- All Medium - A21N used for the default positioning
- Jetway boarding
Note: 23 will reposition to 23A otherwise the Jetway will not reach the aircraft

Gates 29; 33 (Delta):
- All Medium - A21N used for the default positioning
- Jetway boarding

Gates 35; 39 (American):
- All Heavy - B772 used for the default positioning
- Jetway boarding

Cargo Ramps 40; 41; 42:
- 40: Heavy - B77L/F used for the default positioning
- 41; 42: Small - B737 BDSF used for the default positioning
-Walk-In not mapped

GA Stands not mapped

For best results reposition your aircraft upon spawning at the desired position.
For worse results, uninstall the profile and don't use it (haha!!).

To Install, unzip (with WinRAR) and move the .ini file to the usual place.
(If you're not sure where this is, you will need to look this up - I'm not posting the file path as it will differ depending on your PC setup)