
Description
Here is two NX611 - "Just Jane" repaints of the Avro Lancaster by Aeroplane Heaven.
Found at the Lincolnshire Aviation Heritage Centre in East Kirkby, the NX611 "Just Jane" was build in April 1945 and given the serial number NX611. She was one of the first 150 B Mk VII Lancasters, and was destined to be sent to the far east as part of the RAF's Tiger Force. However due to the early surrender by Japan; the NX611 became surplus to requirements and up in storage rather than seeing active service. While a chequared career followed, the NX611 is currently under restoration with the Lincolnshire Aviation Heritage Centre, and currently undertakes fully operational taxi runs for visitors to see with the prospect of returning to fully flying status in the near future.
Within this download is two repaints created by from the original textures by Aeroplane Heaven by myself (ForensMick) of the NX611 "Just Jane". The first is a more original livery which is consistant with many of the older images of the NX611 (including my own from 2023) which offers the original operational markings under the pilots window as well as the single NX611 serial number located on each side.
The second is a current version (or as up to date as i can get) which has the updated operational markings under the pilots window with both yellow and red bombs as well as two Ice creams and a cargo logo. This version also carries the KB976 number which as far as im aware is only on the right side of the aircraft.
Installation:
To instal these liveries just either unzip the file into your Community (FS2020) or Package (FS2024) folders and the liveries will appear in the sim. I have tested this in both FS2020 and FS2024 and they appear and work in both versions. I currently use MSFS addon linker to manage all my add-ons so if you use the same software, simply unzip the file into the liveries folder and then activate the livery within the software.
Note: When in the sims i have found that sometimes it takes a while for the aircraft to appear, I think this is a sim/detailed aircraft issue rather than anything else as it does it with the original AH liveries as well.
Hopefully you guys enjoy these repaints, I am very much a novice at making different liveries and still working out many areas but hopefully it's as detailed as possible. I will be working on some tweaks in the furture but for now, Enjoy.
Avro Lancaster - NX611 - Just Jane
Add the iconic Avro Lancaster NX611 "Just Jane" to your Microsoft Flight Simulator experience with two distinct repaints. These liveries reflect both its original and current markings, showcasing this historic aircrafts rich legacy from its construction in 1945 to its restoration activities today. Compatible with both FS2020 and FS2024, simply install the repaints into your community or package folders for easy access.
Supporters
User Reviews
1 reviews
Version History
Hello Folks, it’s been a few months since my last update for all the liveries, and I’m hoping this one will add a bit of realism to the Lancaster repaints. Over these last few months since the last round of updates, I have taken advantage of my lucky location near three superb Lancaster’s those being the BBMF PA474, the NX611 – Just Jane and KB889 located at IWM Duxford. As I’ve been able to use these aircraft as reference, I challenged myself with the aim of getting the Lancaster looking as close as possible to the real-life version. After many trips and photos to see all three Lancasters, I’m hoping that I have been able to get this update as close as possible to the real aircraft. Before going into detail, I would like to thank you and credit to DeltaSierra, who without his help, I would not have go onto the right track with creating Normal layer files, as well as having his permission to include a few features which I was unable to reproduce myself. Credit goes to DeltaSierra for the following areas: • Forward Nacelles (Area between the prop and the wing edges) • Rear Wing and endplates (DeltaSierra perfected this area, so it didn’t need adding to). • Bomb-bay doors (As with the Nacelles, the texturing here was far better than I could achieve). Now for what I have done, using all the images I was able to obtain of each of the aircraft, I have re-textured the exterior surfaces of the aircraft. This has meant a complete restructure of the panel lines and rivets displayed on each of the surfaces, the wings for example have been redone on both the upper and lower surfaces to match the real aircraft and some blueprints I was able to come across. Details such as fuel caps and panels have been correctly relocated and rivet lines correctly replaced. The fuselage has received the same treatment to match images and blueprints, it is worth noting that some adjustments have been made as there is mapping issues in some areas, however their effects have been limited as much as possible and in some cases go unnoticed. I have corrected the support bar that runs down each side of the fuselage to match correct length as well as adding additional touches here and there such as the small circle on each of the emergency exit hatches on the top of the aircraft these would normally be glass, but the circle detail is all I could add for that. For the rear door there is now a handle on the door when closed, this was limited on any research so I went with as close to an original photo I could find. There is so much more detail added which I could write on for hours, but I hope that seeing it in the sim will show it better than I could on here. Final things to note, as a result of this work some of the repaints have been adjusted for example the size of the Just Jane image (see updated photos) this now matches the correct size as seen on the aircraft this year (as of 01/11/2025). I would advise that if you already have the repaint within your community location or add-on linker, then completely remove/delete the older version before coping in this new one to ensure that the new livery with all its details is installed correctly. Please also check the updated images to see what’s changed for each of the repaints. Finally, if you love the repaint, please feel free to give it a like, or/and if you feel it’s worth it, please feel free to show your support with a donation towards more coffee for many more late nights designing and updating in the future. See you in the sky, ForensMick.
Related

Avro Lancaster - EE139 - Phantom of the Ruhr
The Avro Lancaster EE139 "Phantom of the Ruhr" repaint adds a historically accurate livery to the aircraft developed by Aeroplane Heaven. Built in 1943 and serving with distinction during World War II, EE139 completed 121 missions before being scrapped in 1946. This add-on includes the final coding of BQ-B, as well as original nose art and mission markings. Compatible with both MSFS 2020 and MSFS 2024, the installation is straightforward and integrates seamlessly into the simulator.
by ForensMick

Avro Lancaster - PA474 - BBMF - Leader 2025/Getting Younger Everyday 2027
The Avro Lancaster - PA474 "Leader" repaint is designed for the Aeroplane Heaven aircraft in Microsoft Flight Simulator. This livery showcases the aircrafts current appearance as part of the Battle of Britain Memorial Flight, featuring detailed nose art and historical markings. Originally built in 1945, PA474 has served in various capacities, including reconnaissance and as a test aircraft before its restoration for memorial flights. The add-on is compatible with both FS2020 and FS2024, allowing users to select this livery alongside others.
by ForensMick

Avro Lancaster - W4964 - Johnny Walker
The Avro Lancaster - W4964 "Johnny Walker" is a detailed repaint of the iconic aircraft by Aeroplane Heaven. This livery reflects W4964s historical significance, featuring the original nose art and mission markings from her service with 9 Squadron during World War II. The aircraft completed 107 missions and played a key role in significant operations, including D-Day support and the sinking of the German battleship Tirpitz. This add-on is compatible with both MSFS2020 and MSFS2024.
by ForensMick

Avro Lancaster - EE176 - Mickey the Moocher
The add-on features a detailed repaint of the Avro Lancaster EE176, also known as "Mickey the Moocher," crafted by ForensMick based on the original textures from Aeroplane Heaven. This historic aircraft served with the RAF during World War II, completing a notable number of missions. The livery includes the aircrafts QR-M coding and authentic nose art, as well as bombing markings that reflect its operational history. Compatible with both MSFS2020 and MSFS2024, installation is straightforward, enhancing the virtual simulation experience with this prominent wartime bomber.
by ForensMick



Log in to join the discussion
Log InComments4
Piet de Geus
Netherlands
Very well painted, it looks great.
I was able to take my ex Flight Engineer father to view this Lanc at East Kirkby.