Flightsim.to
    Taog's Hangar Releases the SA315B Lama Helicopter

    Taog's Hangar Releases the SA315B Lama Helicopter

    F

    Flightsim.to

    Author

    November 17, 2023
    Releases

    The SA315B Lama by Taog's Hangar is available since November 17, 2023. This Helicopter addon for Microsoft Flight Simulator follows the lineage of the Alouette 3, featuring a highly detailed exterior and interior model that accurately represents the iconic helicopter. The SA315B Lama, developed by the French aerospace manufacturer Sud Aviation (later Aérospatiale), holds a significant place in helicopter history. Designed in the late 1960s, it was a variant of the Alouette II, but with the powerful engine of the Alouette III. The Lama was engineered specifically to perform well in high-altitude conditions, which was a considerable challenge at the time.

    Its claim to fame came in 1972 when the Lama set a world record for the highest-altitude landing and takeoff, conducted on Mount Everest at an elevation of 7,500 meters (24,606 feet).  The SA315B Lama was primarily used for utility purposes, especially in mountainous regions where its unique capabilities were invaluable. It was equipped for various roles, including cargo transport, medical evacuation, and search and rescue operations.

    Key Features:

    • Authentic Design: The addon boasts a realistic exterior and interior, complete with authentic instruments and controls.
    • Sound Package: An immersive audio experience accompanies the visual fidelity.
    • Customization Options: More than a dozen attachment options allow for personalization for various missions.
    • Detailed Flight Model: A realistic and responsive flying experience, reflecting the unique characteristics of the Lama SA315B, is offered, along with a model for beginners.
    • Diverse Liveries: A selection of 30 liveries.

    Despite its age, the SA315B Lama is still in use today in various parts of the world, particularly in regions where its high-altitude performance is advantageous. Its durability, reliability, and unique operational capabilities have ensured its continued relevance in the aviation world.

    The Lama SA315B addon for Microsoft Flight Simulator can be purchased and downloaded directly from Flightsim.to. It follows Taog's Hangars earlier release of the SA316B - Alouette III, which is also available on Flightsim.to.

    Comments

    S

    over 2 years ago

    Alouette as the first helicopter of Taog and now lama. what a joy, 100 points, 5 stars and just a pure recommendation- There are updates and the developer is constantly working on it. simply one of the best developersThanks for this amazing work.-- happy to see more from you
    T

    over 2 years ago

    Thank you :D
    D

    over 2 years ago

    ive installed it twice now and it shows up in my aircraft list but when I go to fly my sim crashed to desktop
    T

    over 2 years ago

    I got reports from users that unfortunately this is most likely due to addon conflicts/incompatibility
    Please let me know if you manage to fix it
    s

    over 2 years ago

    I just installed this new helicopter. It looks really good however its flight characteristics are unstable. it is very difficult to maintain level flight. Any recommendations would be appreciated. Thanks.
    P

    over 2 years ago

    Just installed this helicopter and thoroughly enjoying it. Is there a list of control bindings I could customise to use with my throttle and joystick. Specifically the fuel flow lever which I would like to bind to one of the sliding axis on my Thrustmaster warthog throttle.
    B

    over 2 years ago



    Beautifully crafted, Many liveries, nice helicopter. Something special about this bird, Love the engine outside and the exposed rib tail section. Flight Model is a little hard to master, although it does come with an Easy Mode Flight model and judging by the Circuit breaker labeled "FM" will have support to flip flop back and forth between the two. For now, easy flight model is changed manually, but not hard to do at all. I suggest turning your reactivity down to 50% for short stick flyers without an actual Cyclic, and Furthermore, if you odn't have rudders and use twist, take your sensitivity up to make the amount of twist for rudder needed shorter!
    10/10 Stars, Taog updates his aircraft, and is very responsive in his Discord which you should join if you have questions. He is there to help!
    P

    over 2 years ago

    HiIs the spraykit functional?
    J

    over 2 years ago

    This is exactly the helicopter I've been waiting for! 2 things that bother me a bit: the helicopter doesn't remember the configuration from the previous flight. (Baskets etc. that I attached)Is there an assignment for the searchlight that works? The small joystick in the cockpit really cannot be used during the flight ;-)
    A

    over 2 years ago

    Great bird ! Love it like the Alouette III Great job TAOG !
    C

    over 2 years ago

    Did you enable the "gyro servo" by pushing its circuit breaker? Still not easy to fly but a whole lot more stable.
    s

    over 2 years ago

    No I didn't. I just took it for a quick spin....lol. Thanks for the tip.
    s

    over 2 years ago

    Very nice modeling work bravo, flight model is very difficult to take in hand, which makes the experience uncomfortable, for now I feel more like piloting a crazy horse, I hope to identify which systems are taken into account to achieve a proper flight.
    d

    over 2 years ago

    Fantastic bird, really good work from Taog's, so much souvenirs for me as I made my first helicopter experience in the real HB-XRL years ago 😅 for me the flight model it's perfect, for whom who complain about stability you really have to push the gyro circuit braker ! I didn't did it at first, it was totally flyable but a bit more challenging, so I think I'm ready to fly it in case of failure 🤣 a really cool bird for my flights in the area of my home town of Sion.
    g

    over 2 years ago

    Good morning. I just got this chopper and use a joystick x52 pro. Impossible to fly because it is too unstable. Are there solutions? Thank youGeorge
    u

    over 2 years ago

    Be sure the MSFS settings is set to 'Realistic' not easy. Then you'll need to adjust the stick sensitivity.
    l

    over 2 years ago

    where is the gyro circuit braker ?
    s

    over 2 years ago

    Magnifique machine bien détaillée. Plaisante à piloter. Bravo pour le travail accompli!
    D

    over 2 years ago

    Hi, I cannot find the circuit breaker of the gyro servo. Could anyone show it on a picture please?Greetz David
    i

    over 2 years ago

    Well with two Sud Aviation helicopters under your belt, I would love to see the Gazelle as I have no real interest in the Llama or the Alouette.
    H

    over 2 years ago

    Fantastic AddOn! I love it! Thank you sooo much Taog's Hangar! 😍 🥰 💪
    t

    over 2 years ago

    What a fantastic machine. 10/10. 2 small things that are probably MSFS code stuff. the string on the window seems to stay in the same spot. no amount of side slip seems to shift it. Also, with the sling load, I cant seem to get up any pilot induced oscillations no matter how hard I try! I do like the weight change with taking on/ dumping the Bambi bucket. 😛