This would not be possible if it was not for Kitson, RichieD to get the project going so in reconition of there efforts they are credited here.

Discord https://discord.gg/PZSCMTXA

New carparks
New terminals (departure and arrivals)
Glass walkway
Fuel trucks and area
Security area
Fire station
Control tower
several buildings on the industial side (Draken etc)
Perimeter fencing
Ground modeling
Radar and aerials
taxiway improvments
runway corrections
various lighting improvments
LODs for performace
more parking areas
Full ATC support
GSX files for passenger pathing
And many other improvments

Feedback welcome and encouraged! It will help make this even better!

GPS Coordinates

50.78000348349431, -1.84301809676792

Recent Changelog for 1.4

LODs applied to car park models
Aerial Court, BLD 62 and BLD 603 added
Re-texturing of taxiways around Draken/Bld 62
Taxiway paths corrected from Apron
MCA Aviation handar door corrected (now blue and horizontal opening)
Draken Hangar door texture updated to reflect relity
Erroneous taxi edge lights removed from Gamma apron
General LOD improvements
GSX - Different pax paths for boarding/de-boarding

12,269 Downloads 26 November 2020

Looks great! Thank you!

8 days ago

kapazunder33

Astonishing, how much great freeware is developed these days, you can explore countless places all over the world now just with payware-quality freeware like this one. Great job.

1 months ago

InfiniteWisdom

Brilliant scenery, thanks RichieD! One question about radio comms: The Approach and Tower frequencies are named Southampton, should they be named Bournemouth?

flea

GSX profile only pushes you back a little way, Other than that a great scenery.

3 months ago

Adam66

Great quality freeware!

Mad_X

Hello, quick question about the GSX profile (where can I find it?). Is it built into the downloaded files and just works without any configuration, or is there a separate file I need to retrieve in order for it to work? Any assistance would be appreciated. (This scenery is very good, keep up the good work!

4 months ago

captainbazza

Seem to have two partially submerged aircraft at the gates Will investigate further

8 months ago

Sunnieboy

Thank you! A beautiful airport!

fsimonline

Phenomenal update. The departure terminal & Gamma hanger look fantastic, kudos to all involved.

MrMoss99

just flew a few circuits in the just flight arrow III, very nice rendition of the airport, thanks

Danutz294

Firstly, great effort with this addon. brings a personal touch to my local airport. I have a question though. For Tower I'm getting Southampton Tower and not Bournemouth 125.605. I don't have that issue with the stock BOH. Not sure if it's your mod or my end. Looking forward to further updates.

slugger111475

Fantastic this my base goto airport, Really pleased it's been worked on, Great job

9 months ago

flightsimcockpit

So glad to see this. Bournemouth is pretty much my home airport when it comes to flying A320. Thank you so much for the improvements.

WillFly

Nice work. It has been a long time but good to see development continuing.

DownedAviator

Very good work, indeed. THANKS A LOT! it would be great ifthe Airport would be continued - Best regards from shity-old Austria, Laszlo

12 months ago

laszlobarki

Great work Tradari. It just gets better and better.

11 days ago

cianpars

I'd hazard a guess that you are using Navigraph. This is a "known" issue . The NaviGraph database was updated some time ago to also include the Southampton tower frequencies as "Apparently" (according to Navigraph) SOU is used as a backup to BOH during busy periods (i've never known this to happen) - apparently MSFS cannot determine which frequency to use as there's no location associated with frequencies. A potential workouround for Navigraph users: Within the sim, select "Options --> General Options --> Experimental", Turn ON the "Package Reorder Tool". In the resulting pop-up window, locate "navigraph-navdata" and the "df-airport-eghh-bournemouth" entries, use the down arrow to increase the number of the "df-airport-eghh-bournemouth" so that its number is GREATER than "navigraph-navdata". Apply and Save. Note that these settings will be reset if you run the "Navigraph Navdata Center".

Contributor 1 months ago

RichieD

1 More Replies

*** V1.3 -- GSX Profile ***
To get the GSX profile to work.. the profile (eghh-7ckmlz.ini) in df-airport-eghh-bournemouth\scenery\global\scenery should be copied into your GSX profile folder C:\Users\[USER]\AppData\Roaming\virtuali\GSX\MSFS\ - the AFCAD setting in the .ini file does not need changing as it is apparently no longer used (i'll remove it on the next release!). It would also seem that the facility of distributing .ini files within the scenery package is no longer supported - hence the need to manually copy the .ini to your GSX profile folder.

Contributor 2 months ago

Copied profile over to GSX folder as suggested and everything works great now. Thanks for your help.

2 months ago

Mike123456

Hi airport scenery is great, however I’ve found that GSX seems to have problems with the scenery and crashes. Anyone else had this problem? Thank you for your hard work.

MSFS CTD every time with v1.3. I have gone back to previous version which works fine.

OK, thanks for pointing that out.. I will address that in the next release. If you have spotted any other quirks/issues or have any requests, let me know!

Contributor 3 months ago

I had hoped the GSX profile would automagically work.. however, if not, the GSX profile is located in df-airport-eghh-bournemouth\scenery\global\scenery and is named eghh-7ckmlz. You may need to modify the afcad_path in the profile to point to your MSFS community folder.

Contributor 4 months ago

Hi,

Thank you for all your great work. I like it a lot.

But there is one thing that you are doing which makes it difficult for me, and dare I say, others, as well.

It' you archive naming convention.

I'm sure that on your own PC, V1.2.0 followed by V1.2.1 makes a lot of sense, but to us poooor downloaders, it's all but meaningless.

Once we've downloaded it, we have to open up the aechive to see what it is.

The standard, when it is used, appears to be some sort of name (for the addon, followd by the version, with the hash characters after it.

I know. I could open the archive and then go down one level, where I'd find a name thaI can recognize, but to me, and I hope, you, it's a lot easier if the contents of each archive is avilable at the top level, without having to dive down into the archive to identify it.

I know, I'm being picky, but unless somebody points out things like this, they can continue to be a source of problems for everyone else.

Finally, consider the problem if a number of developers took up this naming conventions. We could end up with a dozen files called V1.2.1 with different hash characters, with no easy way to differentiate between them, and no way of knowing which particular V1.7.1 had been superceded by that lone V1.7.2.

5 months ago

Thanks John, we are adding one folder upwards for our us so we could remove this before we upload and try and make it ready EGHH V1.21 maybe

Tradari

JohnG

I'm guessing you use NaviGraph? The NaviGraph database was updated some time ago to also include the Southampton tower frequencies as "Apparently" (according to Navigraph) SOU is used as a backup to BOH during busy periods (i've never known this to happen) - apparently MSFS cannot determine which frequency to use as there's no location associated with frequencies.

Contributor 8 months ago

2 More Replies

Discover

EGHH Bournemouth Airport

GPS Coordinates

Recent Changelog for 1.4

Welcome to Threads

Tradari

Discover

EGHH Bournemouth Airport

GPS Coordinates

Recent Changelog for 1.4

Reviews

Comments

Welcome to Threads

Tradari

RichieD

TerrifyingPanda

Review data

Welcome back!