Unfortunately there is no default photogrammetric scenery for Bern, although it is the capital of Switzerland. When you fly circuits around the Airport Bern-Belp (LSZB) with default autogen, it doens't even look close to reality. As I don't like the full scale 3D citys exported from Google because of their impact on the FPS and all the ugly trees, I decided to give it a try by just exporting and converting the most important VRF POI's (unfortunately also with some trees, but I did my best to remove as much as possible).
This addon looks best with the Freeware Scenery "LSZB Bern Belp Airport" from Moonlander69 available from this site. If you like some more POI's, I may give it try. I did some color corrections with ImBatch, but I'm still not 100% happy with it.
GPS: 46°56"N 7°26"E
File:
Please delete any previous version, as with version 4 everything is in one folder. Included are the highrise estates Wittikofen, Thoracker, Holenacker, Tscharnergut, Fellergut, the farm and the industrial buildings on the approach to RW32, old City Center, the Bantiger TV Tower, Westside, Gurten, Inselspital, Kehrichtverbrennung, Postfinance Arena, Wankdorf and lots of buildings along both Downwinds in Belp, Kehrsatz and Muri-Guemligen. All the default POI from WU6 are properly integrated (Bundeshaus, Kleezentrum, Muenster).
Credits:
This scenery has been extracted from Google Maps, hence all 3D credits goes to Google.
This scenery has been generated with RenderDoc and Blender. Color Corrections done with ImBatch.
Installation:
Extract ls_Bern-POI.zip and move the folder into the Community folder. Enjoy flying around Berne!
Ich schätze deine POI von Bern ausserordentlich. Sehr schön und sorgfältig gemacht! - Mit den neueren Updates von Asobo ist beim Turm für Mass und Gewicht in Wabern jedoch ein zweiter Turm aufgetaucht und bei der Kirchenfeldbrücke in Bern ist ebenfalls eine unschöne Turmstruktur störend sichtbar. - Wäre es dir möglich diese Fehler mit einem Update deiner POI zu korrigieren. Ich selbst bin da kein Fachmann und wäre nicht in der Lage dies selbst zu tun. - Falls du eine Möglichkeit siehst meinem Wunsch zu entsprechen, wäre ich dir sehr dankbar...und eine Donation wäre dir sicher.
Gruss Johann
8 months ago
johann724
Thank you for this very nice addon. It has so many wonderful details. Hope you keep going on!
Rosengarten might also need a little refresh from default.
1 years ago
Simplici
Love it! FPS friendly and works great together with the new ORBX LSZB release. Thanks for your work mate!
1 years ago
helvetitsch
könnte man das Inselspital aus der Szenerie rausnehmen? Ist leider inkompatibel mit dem Helipad von HELI30 hier in Flightsim.to. also Heilipad Inselspital. Ansonsten gefallen mir deine VFR Objekte besser als diejenigen von Bern Switzerland V2. Vielen Dank Roland
1 years ago
proli
Thank you for SU11 update!
Looks like a really nice scenery. Just a question, have you considered replacing the photogrammetry trees (as shown in the screenshot) next to the church?
1 years ago
GunStrauss
Toll, danke für die Updates. Als Thuner freut es mich, wenn das Umland etwas besser zur Geltung kommt!
1 years ago
Paaman
Is this scenery still relevant? No new WU/CU in the area? Compatible SU11?
1 years ago
As Bern is not a MSFS photogrammetry city, you may still profit from this addon. WU6 only adds Bundeshaus, Muenster, Wankdorf and Kleemuseum. I excluded them from my scenery.
1 years ago
seimi
GunStrauss
Viele Dank für di tolli Arbeit!! Chlini aregig: är isch zwar nid grad z`Bärn aber aber als VFR Pilot vermisse ig im MSFS dr Chasseral (https://de.wikipedia.org/wiki/Chasseral). LG und witerhin vieli wunderschöni Flüg im FS!
2 years ago
SwissPit
Zitat: "Let's see if I can finish it before or after my holiday" 😉.
Hallo Seimi
Meintest du damit die Sommerferien 2022? 😉
2 years ago
Tja die Auswahl ist gross...... 😉
2 years ago
seimi
fritzantino
Great work!...is there any way to make it possible to land at the helipad of the Inselspital?
3 years ago
SebStep91
Excellent work...please keep on! Thank you for your effort. - Maybe you can correct on a further update the double tower on the Münster, the bottom bridge at the Kirchenfeld and the drowning Zytglogge..would be nice. I like especially the Messturm in Wabern. As I said...excellent!
Johann
3 years ago
Munster and Zytglogge should be fine now. The double or bottom bridges are a problem of the aerial photography, which I can not correct. But now all bridges around the city centre are there.
2 years ago
seimi
johann724
Sehr gut gemacht...leider seit Wochen unbrauchbar
3 years ago
Ein Update kommt, kann aber noch etwas dauern. Die Zeit für Sim-Sachen ist aktuell etwas knapp ;-)
3 years ago
seimi
fritzantino
Excellent work.. but with SU6, it has a loading problem and the plane gets 5 m above the ground and then crashes... Any chance to make an update ?
3 years ago
Gberthe
Very good work well integrated in the landscape.
But with the WU6 and the better MESH for Switzerland, these POI need an update, the old city is too low of about 3meters, the objects need a repositioning in height ...
3 years ago
I'm aware of that and I'm working on a updated version. Let's see if I can finish it before or after my holiday 😉. But it's nice to see that people are still using it.
3 years ago
seimi
laudey1
Herzlichen Dank für die tolle Arbeit. Endlich kann man im MSFS 2020 in/um Bern und Belp ohne Graus fliegen! Freue mich bereits auf weitere Updates 😉.
... und sollten die Ideen ausgehen: Sender-/Aussichtsturm auf dem Ulmizberg, Landi-Silotürme in Mühlethurnen und Wichtrach (https://www.wichtrach.ch/public/upload/assets/293/Landi_Siloh.pdf). Nicht schöne POIs, aber markante Orientierungspunke ...
3 years ago
Vielen Dank für den Input, wollte eigentlich schon lange mal eine neue Version veröffentlichen. Ulmizberg schaue ich gerne mal an, meistens sehe so filigrane Türme mit Goolge Photogrammmetrie aber nicht besonders hübsch aus (siehe Bantiger). Für Wichtrach und Mühlenturnen gibt es leider keine Photogrammetrische Daten.
3 years ago
seimi
PapaZulu