Full GSX profile for justflight LEPA, each gate/parking/ramp is done.
Why I did this GSX profile? Because Palma de Mallorca is my home airport and i know well this airport.
If some ramps don't have Marshaller or VDGS is because in real world they have it like that
-V1.0:
- custom pushback for all gates.
-People walking to the gate in the terminal.
- Custom distribution for all ground services.
-V1.1:
-Custom underground refueling in the same stands/gates like IRL.
- Same docking system in the gates like real life.
-Corrected some ground services positions.
-V1.2:
-Edited stands with the wrong ground services positions.
-Added more parkings with custom pushback.
-V1.3:
-Edited lots of stands with their ground services wrong, all Bravo stands have been modified.
-More stands with pushback.
-Stand 32B is 34B, this stand is named wrong in gsx.
-V1.4:
-Some fixes at gates/stands.
-Fixed the VDGS bug of having two docking system, one from gsx and the other from the airport, some VDGS are floating for prevent this collision between these two VDGS.
-Fixed some placements
-V1.5:
-Corrected some positions
-All stands/gate have custom pushback, some parkings don't need pushback.
-V1.6:
-ALL custom pushbacks have been redone and renamed.
-Fixed more placements of the ground vehicles.
-Added more VDGS as realistic as possible and placed them correctly.
-V1.7:
-Corrected positions of the ground services.
-Corrected the positions of the VDGS.
-Implemented VDGS from stand 30-36.
What im working on?
-Have more people walking in the terminals.
-Correct future errors in this profile.
How to install?
Is very simple just drag the gsx profile to C:\Users\YOUR USERNAME\AppData\Roaming\virtuali\GSX\MSFS
You will find a installation guide inside the file too, thanks to the GSX community, GSX community discord
Please go to the Fsdreamteam installer, configuration of GSX and click in exclude 3rdparty for disable GSX replacement jetways and have the best experience!
Please if any error or suggestion please contact me via comments.
ESPAÑOL
Perfil GSX completo para justflight LEPA, cada puerta/estacionamiento/rampa esta hecha.
¿Porque he hecho este perfil de GSX? Porque me conozco muy bien el aeropuerto y me gusta dar un perfil de GSX que me conozco el aeropuerto.
Si algunas rampas no tienen Marshaller o VDGS es porque en el mundo real lo tienen así
-V1.0:
- pushback personalizado para todas las puertas.
-Personas caminando hacia la puerta de la terminal.
- Distribución personalizada para todos los ground services.
-V1.1:
-Repostaje subterráneo personalizado en las mismos stands/puertas que en la vida real
- Mismo Docking system que la vida real en los stands/gates.
-Se corrigieron algunas posiciones de los servicios terrestres.
-V1.2:
-Corregido los servicios de tierra de algunos stands que estaban mal posicionados.
-Añadido más parkings con pushback personalizado.
-V1.3:
- He editado muchos stands con sus servicios de tierra incorrectos, todos los stands de Bravo han sido modificados.
-Más stands con pushback.
-Stand 32B es 34B, este stand esta nombrado mal en gsx.
-V1.4:
-Corrregido unos errores en algunas puertas/stands.
-He solucionado el error de VDGS de tener dos sistemas de acoplamiento, uno de gsx y otro del aeropuerto, algunos VDGS están flotando para evitar esta colisión entre estos dos VDGS.
-Se corrigieron algunas posiciones.
-V1.5:
-He corregido algunas posiciones de los servicios de tierra.
-Custom pushback en todas las puertas/stands, algunos parkings no necesitan.
-V1.6:
-TODOS los pushbacks personalizados se han rehecho y renombrado.
-Corregí posiciones de los servicios de tierra.
-Se agregaron más VDGS para ser lo más realistas posible y se colocaron correctamente.
-V1.7:
-Corregido posiciones de servicios de tierra.
-Corregido las posiciones de los VDGS.
-Añadido los VDGS de los stands 30-36.
¿En qué estoy trabajando?
-Gente caminando en las terminales y algunos stands.
-Corregir todos los errores que vayan surgiendo.
-Añadir nombres personalizados para el retroceso en cada stand ( Futuro)
¿Cómo se instala?
Es muy simple, simplemente arrastras el perfil de gsx a C:\Users\TU USUARIO\AppData\Roaming\virtuali\GSX\MSFS
También encontrarás una guía de instalación dentro del archivo, gracias a la comunidad de GSX, discord de la comunidad de GSX
Vaya al instalador de Fsdreamteam, configuración de GSX y haga clic en exclude 3rdparty para deshabilitar las pasarelas/jetways/fingers de reemplazo de GSX para tener la mejor experiencia.
Por favor, si hay algún error o sugerencia, comuniquen conmigo a través de los comentarios o discord Zocopeta#9652.
24 days ago
22 days ago
Zocopeta
cejoh
4 months ago
Zocopeta
7 months ago
4 months ago
Zocopeta
thot2778
Is this the Version from Simmarket with the JSPCO Author?
9 months ago
FouR
So this GSX Profile is only for the Justflight LEPA?
10 months ago
9 months ago
Zocopeta
makiwa
Today i started working on renaming ALL custom pushbacks, im with global exams and i suppose before 28th June will be published, thanks for all the downloads
10 months ago
Also im redoing all custom pushbacks for best realism, also positions and docking system
10 months ago
Zocopeta
Zocopeta
Muchas gracias yo tambien vivo en mallorca y vuelo mucho desde y hacia este escenario.
El problema que yo tengo con las personas caminando por las terminales en general es que consumen muchos recursos (FPS) todas las animaciones de MSFS incluyendo GSX consumen mucha CPU, pero agradezco el trabajo que esta haciendo con LEPA de Justflight.
Ya editare manualmente los stands para quitar a la gente caminando.
Un saludo desde Sa Rapita.
12 months ago
Intentaré al acabar exámenes hacer una versión sin gente caminando por la terminal.
Un Saludo desde Palma
11 months ago
Zocopeta
NEOmallorca