This is a Axis and Ohs package with 2d gauges to get and receive NAV1 and ADF1. AAO is needed to display them.
This pack contains a gauge to display the ADF and the VOR frequencies and allows to change them and swap them with the standby (it detects if the standy freq is available and displays it acordingly). Is a great enhancement for some planes without ADF (you can always activate the ADF in the System.cfg of the plane).
This gauge does also include a needle to ponit in the direction of the NDB and the VOR BUT ONLY WORKS WITH THE B247D of Wing42 because it is linked to the gyro of the plane. For other planes you can use the ADF indicator included in the LORBY AXIS AND OHS default gauges.
Oil quantity (red mark is 100% after oil change) (only B247D)
Fuel consumption (can be used with any plane)
EGT (default var, this gauge can be used with any plane, the plane does not use a local variable here)
Generator (light on when positive charge, up is on, down is off, selectable with the mouse wheel - can be used with any plane)
To install, unzip the archive into the folder Documents\LorbyAxisAndOhs Files\UserGauges. Be sure to have a folder called 1024 containing the images.
Also, I have included a file (Systems.cfg) that changes the 0 to 1 in some lines to allow the plane to use the NAV and ADF radios, and also adds functionality to the radio com2 so you can simply click in the ATC menu (com2) and it will tune teh radio automatically.
Replace teh Systems.CFG on the plane folder wing42_boeing_247d/SimObjects/Airplanes/wing42-boeing-247d/Systems.cfg
If you want to do it yourself, under the section [Radios] it sould read:
[RADIOS]
Audio.1 = 1
Com.1 = 1, 0
Com.2 = 1, 1
Nav.1 = 1, 1, 1
Adf.1 = 1, 0
Transponder.1 = 1
Marker.1 = 0
Also, under [ELECTRICAL]
I added an extra circuit for the com2:
circuit.36 = Type:CIRCUIT_COM:2 #Connections:bus.6 #Power:1, 1, 11.5 #Name:COM2
1 years ago
concha