Not Downloaded yet
Version 1.1.1
Initial Release October 22, 2020
Last Updated October 31, 2020
File Size 9.81 MB
Downloads 502
This file has been scanned for viruses and is safe to download.
#Real-Life #4K Original
Building on BaroqueNickel52 livery ( (get it here), another  example of the French Navy flight school, complete with big anchored roundels 

NB: a little heavy, as fuselage is in double resolution, to get more details.

WARNING: In order to get rid of the tail number of the sides and the belly you need to modify native CAP10 AIRCRAFT.CFG located in the following directory:
...\Packages\Official\OneStore\asobo-aircraft-cap10c\SimObjects\Airplanes\Asobo_Cap10C

Following modification has to be performed
atc_id = "" ; tail number
atc_id_enable = 0 ; enable tail number

Pretty empty over here.


Pretty empty over here.

  • Version 1.1.1 October 31, 2020

  • Version 1.1 October 31, 2020

    Livery updated to work with patch 5

  • Launched October 22, 2020

    Initial release of this file just launched. Welcome aboard!


Pretty empty over here.

6 Comments
  • image
    jolouv
    November 11, 2020

    Hello, could you please make the EIP 51S livery, not so far from the 50S ? To make my dream comes true in MSFS: I was at the BAN Rochefort in 1987...Thanks. And Great job !

  • image
    gabuzomeu replied Author
    November 14, 2020
    Hello, do you have a picture ( is the insignia on the right side of the nose, as on the left side? ) Any preference for the aircraft number?
    image
    jolouv replied
    November 14, 2020
    Hi, I found this one, THE 212, I don't own any papered photo anymore (we were in the 80's :)). I remember the insigna was on the both side of the engine.
    https://www.facebook.com/EIP51S/photos/2934213270020123
    Thank you so much.
    image
    gabuzomeu replied Author
    November 14, 2020
    Hi, File is submitted and should be available shortly.
    I put a large insignia, as it's so nice with the pinguin
  • image
    BaroqueNickel52
    October 23, 2020

    Incredible work! I just realised that I totally forgot the cockade and number on the wings... Now it is perfect! How th did you do for the nose cone and the gears??

  • image
    gabuzomeu replied Author
    October 24, 2020
    Nose cone: It's yours, I just changed colors, and filled small gaps but the tough spiral is unchanged.
    Gears: real pain: I used a multicolor grid to see where the line should be, putting dots in the proper place. Then it's just "connect the dots"

© gabuzomeu & BaroqueNickel52 - All rights reserved. Any reupload or redistribution of this file without the author's prior written consent is forbidden.
This Flight Simulator 2020 Mod was created by gabuzomeu & BaroqueNickel52 and shared in Aircraft Liveries » Robin CAP-10 for Microsoft Flight Simulator.

Dedicated Link Improve Report